I have several Cisco 881 deployed in the field for VPN connectivity back to my main office. When the ASA at the main office gets rebooted during routine maintenance, the Cisco 881 always have to be rebooted before they will re-establish a VPN conne...
Please Help, I cannot telnet into my 1921 router and not sure how to fix this. See below. line con 0 password 7 XXXXX logging synchronous login localline aux 0line 2 no activation-character no exec transport preferred none transport output pad tel...
Here is a copy of my cisco 881 easy vpn config. Can someone please let me know what I need to modify so this will work on a cisco 1921.Thanks in advancehostname BTLvpnboot-start-markerboot system flash:c870-advipservicesk9-mz.124-11.T3.binboot-end-...
Good Morning,I have an ASA 5505 with security plus licensing. I need to set up split tunneling on the ASA and not sure how. I am very new to Cisco but am learning quickly. What I want to accomplish, if possible is to send all traffic to our corpo...
The one issue I am having is that when I try to use the internet port on the back of the Cisco Phone, it is handing out an IP Address for the Voice Vlan (172.30) and not the Data VLan (172.31). Therefore a laptop that I plug into the internet port c...
Thanks for your help. The 1921 is up and working. It drops my bandwith from 10mb download to about 3mb download. Is that normal when tunnelling all traffic?
Thanks. Here is my final config that I will try out tomorrow when I get into work. Thanks again for all your help!hostname BTLvpnno logging bufferedenable secret 5 XXXXXXno aaa new-modelclock timezone EASTERN -5crypto isakmp policy 1 encr 3des aut...
I think I understand how to set up the wan interface under inter gig 0/0. I am just not sure how to set up the lan interface. If I use interface gig 0/1, how do I go about setting up the sub interfaces? How would interface gig 0/1 look and what ...
