Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, I have 2x 10Gbps link (setup as a port-channel 20Gbps) When the links hits about 50percent traffic - around 10Gbps i see discards on the interface. Looks like its being dropped by Nexus 7k default policy. What would be the recommended way to ge...
Hi All,I have single site with 3x 3750 stacks where around 100 users and one fileserver connected (all using 100Mbps) We have issues where a user might be copying a large file to a file server which effectively slows down all other user access to the...
Hi All,We have a ASA 5510 running 8.2(1) and ASDM 6.2(1)Since yesterday evening ASDM sunddely stopped working. When I login I get Unable to launch device manager from xx.xx.xx.xxFirewall Uptime as of today 1 year 145 days. Firewall has 1GB ram and 76...
Hi All,We have 2x Cisco 3750 WS-C3750-48PS-S and 1x WS-C3750-48PS-E in stack mode. They all work well. Currently they have c3750-ipservicesk9-mz.122-25.SEE2.bin on them which is deffered by Cisco. What would be a good alternate, stable version for my...
Hi All,As the tittle suggests, I need a way to block MAC OS X users connecting remotely to our coporate users over VPN. I know there is an option to block connections based on VPN client Version, but cant find a way to block users based on operating ...
Thanks Manoj. It actually looks like its not a single flow.I see around 9-10Gbps of traffic on Port-channel, on both member ports I see traffic divided 55/45 percent
Hi Manoj,Thanks for your reply. I had a look and we are using below load balancingModule 1: Non-IP: src-dst mac IP: src-dst ip rotate 0Module 7: Non-IP: src-dst mac IP: src-dst ip rotate 0 I believe the traffic was one flow between 2 devices. Do ...
Do you have cisco stackwise stack power cables connected between the stacks? If so ensure they are connected correctly.DATA Stack Cable:Sw1 Stack 1 >>>> SW2 Stack 2Sw1 Stack 2 >>>> SW2 Stack 1Stackwise Power cableSw1 Stack 1 >>>> SW2 Stack 1Sw1...
Hi Paul,Thanks for your comment. I can confirm user and server are in diffrent vlan. Issues occurs e.g. when user A in vlan 10 on port fa1/10 copies a 10gb file to file server in vlan 20 on port fa1/20.During the file transfer fa1/20 port is utilized...
