Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
hi guys, working on integration setup for creston device and cisco 3850 switch. Current topology, cisco 4500-x is the core switch and cisco 3850 is the edge switch. Creston device needs to be in segregated vlan that allows multicast between floors. ...
Hi guys,Is this possible to have another T1 card installed on the UC 560 T1 model? Can someone or perhaps cisco tech verify this? I already built-in T1 connected to the exisiting primary telco, and I am planning to have another T1 card setup for seco...
guys,how do you configure firewall when one of the isps is dynamic? primary internet is static and secondary internet is dynamici setup 3 vlans, 2 outside vlans and 1 inside vlan. i specify route command for the outside vlan with the track, but i don...
Hi,I would like to find out if the conference call can be made with the following scearios:- - UC 540 is currently setup with the key setup (4 POTS lines), each line is assigned to 1 outside line.- - If there is an active call on one of the but...
guys,i need your assisance to double or triple check my port forwarding, basically i want to have 1 public ip for muliple rdp connections.configuration as followaccess-list 100 extended permit tcp any host x.x.51.126 eq 3393static (inside,outside) tc...
Hi Reza - thanks for feedback. I will try adding that command to all edge switches and let you know next week. What am I supposed to be looking at from sh ip igmp snooping querier output?
Hi Julio,Yes, they provide me with dynamic ip address. so it looks like this, I don't know how to make the route fail automatically since the second ISP is dynamic. interface Ethernet0/0 switchport access vlan 2!interface Ethernet0/1 switchport acces...
Hi,Thank you for the response John. So how would you configure barge in? I agree to your recommendation, but this is the customer's expectation. If this isn't doable then I will say so to the customer. Is there a documenation related to this conferen...
