I want to set up a site-to-site IPSEC VPN between 2 locations, where I am the administrator for Site A's Cisco ASA firewalls and Site B is a 3rd party company:
Site A: 10.10.10.0/24
Site B: 192.168.20.0/24
From Site A's Cisco ASA firewall, I want...
Hi,
I've recently started at a new company - as usual, no documentation etc!
Anyway, it seems we have recently been introducing Apple Macs to our previously Windows-only environment. However, the Mac users are unable to connect to our VPN (ASA...
Hi,
the identity certificate on our ASA5545 (running 8.6 software) is due to expire soon. I understand the process to renew means obtaining a new certificate and installing it on the ASA.
So, I have obtained a new certificate from the CA (Entrust)...
Hi,
we have to renew our SSL certificate (for AnyConnect VPN) with Entrust and I'm slightly confused over SHA1/SHA2 so thought I'd clarify on here first!
Our ASA is running version 8.6
Our current SSL certificate from Entrust is SHA1.
Can we rene...
We have a large number of branches with Cisco887VAG routers. They are set-up with 2 x IP SLA monitors, which are tracked such that if both IP SLA's fail then the router will switch from ADSL to it's 3G connection. IP SLA 1 points to a device on our...
@Rahul Govindan If possible, could you be able to elaborate on your suggested workaround a little more? I'm struggling to work out exactly how to do it? Thanks.
Pretty much along the same lines as the other thread:
- established site to site IPSEC VPN as a "short-term" tactical solution
- strategic solution was to merge the 2 networks into a single MPLS based solution
- standardised on Cisco 800 series rout...