So depending if you're more comfortable with CLI or GUI, the below links can get you going.CLIhttp://www.cisco.com/en/US/partner/products/ps5853/products_configuration_guide_chapter09186a008067e8e9.htmlIf you're not familiar with CLI give Security De...

The WiSM is actually two 4404s so the specs should be the same with a couple of exceptions such as the WiSM supports up to 300 APs, the 4404 is 100. Max throughput per control is 8Gbps for WiSM, 4Gbps for the 4404. You may find what you're looking...

Yes, the feature for supporting remote APs is HREAP. http://www.cisco.com/en/US/products/ps6305/products_configuration_guide_chapter09186a00808e5190.htmlThe caution is around bandwidth and latency over those links. These are some of the main factors...

the Nokia client 1.1 works with CCM 4.x, 5.x or 6.x, CCME 4.x and later, as well as the UC 500.Later...

Feature Navigator does show WPA2 support for the 871W, 12.4(15)T1 (Adv IP Services or Adv Security) being the latest. It looks like support was first in 12.4(11). You can check quickly in CLI on the radio interface see what ciphers are supported - ...