Hello Everybody, we have replaced a voice gateway ISR 28xx with the new generation 4331 but we are facing a strange problem, we monitor the isdn ports via snmp traps, the trap has some attributes like the interface index, here an example of the trap ...
Hi Community,
I'm working with CMX 10.2 and when I started to gather documentation I found that in version 8.0 It was present a functionality called Alternative Path Analysis where you could have a view on the map about the percentage of paths took b...
Hi,is there someone who's working with cme 7.1 with ios 15.0(1)M integrated with UCCX 7.0. I need to upgrade the cme hardware with an ISR2 but If It would possible I prefer not to upgrade the Uccx.I read the various compatibilty matrix for cme and uc...
Hello, I'm installing both system, CUE and CCM, reading documentation, I verified that I have to: "you must use a local system administrator account",this is a user configured on CCM, It's a web user for cue that permit to It to access to CCM, but It...
There's a world behind that issue ;) .... basically the first place where I would have a look is the partition of this user's extension under the DN of the Device Profile
The error seems to be related to the spanning tree, maybe on cisco side you have the portfast enabled on port facing to hp and on the hp port you
have the stp enabled.
In such scenario hp is sending bpdu on a port where cisco is not expecting It.
T...
Hi,thank you for your post, I'm facing more or less the same issue, the only difference is that I have a ucce platform, a customer calls a service and the script associated performs a label ( means a transfer ) to a mobile number, we need to display ...
You could set your phone with a temp tftp server ip address, for example the ip of a PC running tftpd32, It's a free tftp server software. You have to copy in the folder of the tftp server the default xml file "XMLDefault.cnf.xml". I'm going to attac...
Very Interesting !!I don't have a direct answer for this but just to check the easy things:- Did you configured under voice service voip the "ip address trusted list" with the ip addresses of the servers in the cluster or the "no ip address trusted l...
