Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HI,I want to upgrade the Cisco ACS ver from 4.0 to 4.1.1.24 running on VM envoinment with primary and scondary server. I have tried to find documents related this upgradation. My target is:4.0====4.1.1.24====5.3Secondly I wanted to know that this upg...
Hi,I have a new 2911 VSEC/K9 bundled router which is running IOS c2900-universalk9-mz.SPA.151-4.M4.bin. I have configured CME as Cisco recommend. I enable EULA I found this below error.CME licensing (cme-srst) feature enabled with no license installe...
Hi All,One of my customer wants to upgrade their Cisco ACS version from 4.0 to 5.3. The client has existing ACS version 4.0 windows on VM with two instance and need to upgrade to 5.3 Linux.As per my understanding following version are supporter to u...
Thanks for you reply,I took the smartnet for thw said issue, it is an battery failure happening during router boot up, which makes the time to Feb 6 2036.Error message:“Feb 6 16:35:09.000: %MAINBOARD-3-RTC_BATTERY_FAILURE: Real Time Clock (RTC) osci...
Hi,Thanks for your reply, actually I have also configured the valid NTP server but the same issue presist. If you need further detail regarding this I will provide you.Thanks,Usman
Hi,Actually when I create the cnf-files in telephony service, I got an error message which that is belowCNF-FILES: Clock is not valid or synchronized, retaining old versionStampsI have already set the clock time:CME# clock set 13:32:21...
Thanks for you reply, please see the mentioned detail:Router#sh licenseIndex 1 Feature: ipbasek9 Period left: Life time License Type: Permanent License State: Active, In Use License Count: Non-Counted License Priori...
