Lets first upgrade the code, if issue is not resolved, we will revisit to configs.Its not a platform issue, same behavior will be seen on all ISR-G2 routers.Regards,Pabla
Also, you might want to see http://www.cisco.com/en/US/docs/ios-xml/ios/qos_conavd/configuration/15-mt/qos-conavd-dial.htmlShaping on dialer was introduced from 15.3(1)T
Can you please provide following outputs :show ip int briefshow run int virtual-access <# seen from above output>Complete 'show policy-map interface' output.Regards,H. Pabla
hi,The CRS may report intermittent i2c hangs, when an i2c bus hang occurs monitoring and communication with the power supplies and fans is hindered for the time that the bus is hung. This explains the fan errors you are seeing.This problem is NOT ass...
Problem:
During a router reload, ROMMON is reporting that he can not clear an I2C bus hang.Resolution:The fix has been released in ROMMON 1.54ROMMON 1.54 is bundled since IOS XR 3.9.0. So any version of IOS XR from 3.9.0 should have at least this ver...
