Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I'm attempting to implement Guest Anchor tunnelling between two WLC's but I've run into an odd issue I cannot find a clear answer to.We have two 5508 WLC's, both Running 7.4.100.0.The Guest Anchor Controller obviously resides in a DMZ, it's functi...
Hi All,Hopefully an easy question.I have an existing 5508 running 7.0.116.0.We have now purchased a second 5508 which needs to be joined to a common mobility group. When I booted the second 5508, I discovered its been shipped from our supplier with a...
Hi all,I'm attempting to configure Classification and Marking on our access switches using the MQC model. The Switches are 3750's running IPBase Version 12.2(35)SE. For some reason when I activate the policy-map on an interface, no traffic is being t...
George, I had thought so, checked it again and found the authentication order on the Internal Controller was slightly different. Corrected that and it now works.Thanks
Hi George,Thanks for the reply.The Guest WLAN on the Internal Controller is Anchored to the WLC in the DMZ. The Guest Anchor is anchored to itself.There are only two controllers in the configuration, so breaking off one of the Anchors isn't really a...
Thanks George,I'd misunderstood the Configuration Guide from the looks of things, was under the impression you just added peers with a matching name (using the group name like a PSK).Thanks for the help.
