Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have few cisco classic series switches connected with each other via trunk port config. Having port inconsistency issue at one departmental switch with Core switch. Requesting for some assistance to sort the issueAt core switch I see inconsistency ...
Greetings,Currently we are using default vlan-1 for all users desktop/laptops, servers, switches wireless etc.To avoid broadcast related issues & to break network into smaller segments, We are now in process of adding vlans on per department basis, ...
I have one cisco L2/L3 manageable switch with multiple vlans (no intervaln routing). I also have 2 x mikrotik routerboard configured as pppoe server. I want to distribute vlans among both CCR via single cisco switch. Example users connected on vlan ...
I am trying to connect my SR650 server (ThinkSystem SR650 (P.No: 7X06CTO1WW ) to my 10g Cisco switch (WS-C3850-24XS-S) via MM Fiber cable, If I insert lenovo provided SFP (P.No 46C3447) at both end (server to switch) then the port gets err-disabled w...
We have two Cisco SG500 52PP model connected separately to our main NOC switch over fiber. Both switches are pretty much in standard configuration, VLAN1 is used, SNMP is enabled for remote monitoring. Very few users are connected on these switches a...
Unfortunately this morning (before reading this thread), we tried to upgrade the switch firmware as one of other proposed solution, but during upgrade process it got hung & upon rebooting switch became unresponsive at all.We have replaced the unit wi...
From scalability perspective, (as company is growing & departments are being adding up) , it is better to have separate VLAN for all regular Wifi users (corporate users only) to connect via single SSID with separate single VLAN. This way all wifi use...
@kill8472 I was in real pain as i had cisco 3850 stack & IP helper was not forwarding the other vlans (like vlan 10/11/12) users dhcp pkts to domain controller dhcp residing on default vlan-1 despite all settings seems correct, I contacted few Cisco ...
