Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,We recently upgraded our WSAs to 7.5.1-079 and now have very poor performance when uploading data. According to Cisco, this is a known bug, see...http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCui4...
I have a 3750 switch which does not boot. It keeps going into monitor mode. doing a boot gives the following...switch: bootLoading "flash:c3750-i5-mz.122-20.SE1.bin"...flash:c3750-i5-mz.122-20.SE1.bin: no such file or directoryHow does it know what t...
Problem solved. Since ver 7.5 it is possible to revert to a previous version. I ended up going down to 7.5.0-833 and my perfomace problems went away. Not happy that Cisco released 7.5.1-201 without having fixed the bug in 7.5.1-079!!
Hi Glen,Thanks for that, it worked perfectly. It would have to be an IBMer with a solution. I work for IBM Belgium!!Thanks for everyone elses input too.Regards,Bill.
Thanks for the prompt reply but nothing shows on the flash either.switch: dir flash:Directory of flash:/15997952 bytes available (1024 bytes used)switch:That is why I was wanting to know where it was getting the old image name from.Regards,Bill.
