Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Does anyone know how to clear this up without an IOS upgrade or reboot? Does not appear to be detrimental at this time, but generating log entries.This is a 6509 Sup720 running 12.2(18)SXD4, with uptime of 2 years, 36 weeks, 4 days, 5 minutes.004197...
We are seeing slow file transfers from EMC to the end XP stations after enabling MLS QOS on the access layer 3750 12.2(25)SEE3. I believe the EMC Celerra runs Linux and utilizes Samba for file sharing. I ran across an earlier post.http://forum.cisco...
Anyone running 4.0.206.0 yet? Upgraded from 4.0.155.5 (LWAPP) and now seeing the access points randomly disconnect and reconnect to the controller much like the old CSCse64027 bug. Below are the traps but I have not made any config changes as noted...
Has anyone tested Aironet IE with Cisco 350 card and CB21 (Cisco ABG card) on 4.0.155.5? Without Aironet IE enabled, the CB21 does not report back CCX. When I enable Aironet IE, the CB21 reports back CCX4 (I have latest driver 3.0), but breaks the ...
Mark - I have not tested but would believe per SSID would limit all the users on that particular foreign controller to that value. So if you set it to 4Mb, then all the users on that SSID on that controller would aggregate to 4Mb upstream. Now apply ...
Mark - I think what the documentation means is the AP enforces upstream shaping and the controller downstream. We use per-user shaping on our Guest SSID at both the Foreign and Anchor. We found the Anchor controls downstream shaping and the Foreign c...