Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm having an issue configuring mvpn in between a N7K and IOS Router.On the IOS router, i'm seeing this error message:DT-4-INCOMPATIBLE_TUNNEL_TYPE: Incompatible tunnel type in BGP update router_id:10.16.32.1 RD:10.16.32.1:13 type:1 tunnel_type:4; lo...
Hi Todd, FlexVPN offers several VPN deployment models, so you might consider it a VPN frame-work.It might not be a term Cisco would use, but it offers all the various IPsec VPN deployments models under one umbrealla so to speak.If a Cisco representat...
Hi Brian, How about configuring webvpn on the DMZ interface as well as on the Internet facing interface?Was in the same situation a few years back. It was easier to just configure webvpn on the guest-dmz interface. I'm pretty sure that the ASA is not...
Hi Todd,How about deploying ISR routers connected to the 3750X switches at each site, and implement a VPN solution in between the ISR's - such as FlexVPN or DVTI/SVTI.Using a dynamic routing protocol would allow you to advertise routes within the "In...
