Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Greetings.I have had some problems with the DHCP servers. The siemens VOIP equipment requires the Option43 to be setuped, first the terminal gets the data vlan and the the voice VLAN address.I have disabled the no ip dhcp conflict command, because I ...
Greetings.L3 - 4503 and L2 - access 2960Siemens Optioint 420 seriesI have a voice vlan with a /16 mask. I have almost 500 IP phones on this subnet.Here are some configs:voice vlanip dhcp pool telefon-pool network 10.2.0.0 255.255.0.0 default-rout...
Greetings everyone.On C6500 series I have to create a separate community to send a SNMP trafic for a couple of gig interfaces.The user that will collect these informations has a Monitoring server and is only interested in monitoring traffic on those ...
We have two c4500 with above characteristics.The cpu usage is even more higher when I apply a voice ACL on the on of the switches, more than other.The peak is at Lopri processes.I attached the show procc cpu and sh platform health.When I apply a ACL ...
Hello members. I am trying to write an extended ACL for the voice vlan.My scenario is the following:I have two PBXs with two Catalyst 4505 L3 switches.The C4505 are connected trough a trunk link.I have a VTP domain configured.Voice VLANs are Vlan 100...
I have tunned the ARP timeout on the Voice and Data vlan to 4 minutes. And setuped the mac agging to the value of 500.I have cleared the IP dhcp binding database, and reload the router C4500 . In the Voice Vlan there are about 600 IP telephones. And ...
Greetings.Yes you are correct. 4500 is a dhcp server.Here are the configs for the DHCP data and VOICE vlanip dhcp pool telefon-pool network 10.7.0.0 255.255.0.0 default-router 10.7.1.1 lease 7ip dhcp pool DADA network 10.10.96.0 255.255.252...
Greetings.Thanks for the reply.I have found a way to create a separate community and and snmp view for that community.So with snmp-server view servergroup ifInOctets.1 included I allow only certaion OIDs to be exported via this community.After that ...
I think I do not have any links affected with the path mtu, but I do now if the unreachable is configured on the router in the path?You think if this is configured on the my default route router?
