Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have ASA 5510, CUCM9.1, GW 2911 with FXOwhen i try to connect to meetme conference works for no more than 1 minute (in VPN), after that i dont have a ping to the gw 2911 and the ip comunicator is down from the VPN client but the VPN still UP, im n...
I have 2901 i cant reach next hop, here is the configurations and pings..Somebody can help meRouter#sh runBuilding configuration...Current configuration : 1249 bytes!! Last configuration change at 17:39:44 UTC Sat Feb 2 2013version 15.1service timest...
Hi, i have a Jabber customer IPHONE, when i send call to PSTN (FXO), after 19 seconds the call is disconnected, here is the voice history:1302 : 129 15:33:51.499 EDT Sun Sep 16 2012.69 +4180 +23720 pid:77 Originate 87863458871dur 0...
I have a problem i have a SIP trunk working well but when i configure the jabber ios, at UC500, this siptrnk drop calls for incomming and ountgoing, the CME is 8.6 if anybody has the solution..
I disable the skinny and when i made the call works.. but when i did other calls my VPN lost connection with the gateway but the VPN still connected.. any body ahs another idea?calls between SIP works perfect, is between GW with FXO fom CUCM..
Hi the answer is some mistake with access list, i create NAT and the access list.. here is the configurationsthanks everybodyRouter#sh runFeb 3 01:16:14.771: %SYS-5-CONFIG_I: Configured from console by consoleBuilding configuration...Current configu...
The BE3k, works under SIP, different than SCCP, you can add FXO by SPA 8800 or cards in the routers, couldbe no problem with that, also you can add PRI or BRI in the router, because conexion between router and BE3K is SIP, just make sure about DSP re...
