Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have some Cisco 2960 switches running c2960s-universalk9-mz.122-55.SE7.bin. We downgraded to this from c2960s-universalk9-mz.122-58.SE2.bin at the advice of our support provider when this issue first started. Sometimes, a couple of VLANs on a sw...
Is it possible for a computer connected via Anyconnect to talk to another site connected via IPSec site-to-site tunnel? We have a user that wants to VPN in and acess a desktop in a remote city. Originally the remote city was connected as EasyVPN. ...
We have a strange issue where every time we try to enable a trunk on our VSS switches, we lose our EIGRP adjacencies. We have an 8-port 10GE blade in slot 9, and we are using ports 1/5/4, 2/5/4, 1/9/8 and 2/9/8 for our links between the 2 chassis. ...
Hello everyone. I have an interesting problem. I am trying to enable multicast on my WAN to enable Enterprise TV with my DMM and DMPs. The problem is that once I enabled multicast on the WAN and start sending traffic, I will randomly have EIGRP an...
We have a CPAM server and many gateways. I was wondering if there was a way to hit a web page, call a phone number, etc that would allow a user to remotely unlock or "buzz in" a door. We could wire a power disconnect to the mag, but I am trying to ...
Thank you both very much. A TAC case is already open and is making zero progress. With that said, I am working on sanitizing the config from our core. I am attaching a cheesy diagram of the setup, which is fairly simple. The VLANs in question onl...
Ok, so if I do a trace from the remote site ASDM trying to talk to the client, I get an SA after the 2nd attempt. I get an SA on both sides but no encaps/decaps. I assume the SA is building due to the packet tracer, but the actual traffic I am tryi...
I have tried running packet tracer, but I can never figure out which interface to put it on when testing the VPN side. I do not get any IPSec SA when I send test traffic, so that might be where I need to look. I am trying to get access to a compute...
Haha, no problem. We do have intra-interface set and the clients can browse the web. The VPN client pool IS in the encryption ACL on both ends, and we have those addresses set to "no-nat" as well.
