Is there any possibility to reduce these tremendous drops?Short network diagram:LAN----C6880-X----FEX101----Client >>> High drop rate at all Gi-InterfacesLAN----C4506---Client >>> No Drops FEX-101#sh verCisco IOS Software, C6800IA Software (C6...
For a TCP-session where a server sends data over a Te-Interface to a client connected at a Gi-Interface the traffic throughput significant slows down. This happens because the client is not able to act fast enough for the server and the switch drops...
After rebooting the parent switches there are following syslog messages, what does they mean?Apr 17 08:42:47.149: SW2: fm_cm_set_port_mode_for_rtype: idb - mih mapping failedApr 17 08:42:47.149: SW2: fm_cm_set_port_mode_for_rtype: idb - mih mapping ...
After upgrading 6880-X to Version 15.2(1)SY0a our 6800IA clients running into download loop by requesting an image update process that seems to be not necessary because the version stored at 6880-X and the 6800-IA modules are identical 15.2(3)E . Ap...
Hi,after upgrading LMS to version 4.2.5 we could use LMS as syslog server collecting syslog messages from other network devices or creating syslog reports with LMS. This was not possible with LMS version 4.2 so we tried to install the remote syslog c...
Hi,TAC Observation:- The temporary workaround is to create any lan-queuing policy-map, apply it on the FEX interface and then remove it. class-map type lan-queuing match-all cs1match dscp cs1 class-map type lan-queuing match-all cs2match dscp cs2 pol...
Hi,thanks for your answer.After solving the ISSU/eFSU Upgrade disaster, I finally upgraded both VSS-Switches to Version 15.2(1)SY1 and also the FEX-stacks to Version 15.2(3m)E1.After that, I configured the switches and FEX as CISCO advised.Router(c...
I can confirm the sad but useful information. Also with us failed the ISSU upgrade. The ISSU COMMITVERSION command doesn't work after the former standby switch was upgraded by eFSU.Old Version: c6880x-ipservicesk9-mz.SPA.152-1.SY0a.binNew Version: c6...