About WStoffel1

WStoffel1 · 07-16-2015

I had two L2L tunnels connected to my ASA. Both far ends are a single customer, two offices, both with Sonicwalls.Tunnel to each site was fine, then there came the need to have the two sites be able to talk, RTP for new voip set up. Updated the tunn...

WStoffel1 · 06-15-2015

I'm currently battling a bot-net on a 8.2 ASA but i dont have the license. So enabling the botnet filter is not an option. Yet. I'm curious if anyone has struggled with this, and has a few ideas on finding and tracking down the offending machine......

WStoffel1 · 11-21-2014

So i've been confronted with an interesting problem. As of right now it's a blank slate as I'm not sure how to do this. There's a broadband Internet connection from the cable company that needs to be configured as the internet connection for the La...

WStoffel1 · 05-13-2014

I've had a tunnel in place on a 5505 to a remote network i don't control...so my troubleshooting there is limited. But the tunnel has been in place for over a year without issue. Suddenly it doesn't appear to be passing traffic. But it is in at le...

WStoffel1 · 02-04-2014

Can it be done? I have a Cisco 1921 with two of these cards. Thanks to Mithun Puttamadaiah on another post i got the config going. Theres a surprising lack of documentation on this card.But I do have 2 vdsl lines coming into this facility, so how ...

WStoffel1 · 07-17-2015

Good enough for me, it is verrrrrrrrrrry old code. And pretty inexplicable why it was happening. thank you.

WStoffel1 · 07-01-2015

Thank you...it has helped immensely.

WStoffel1 · 11-26-2014

Meaning updated code *would* be able to correctly route traffic? What version? I can get it updated. :)

WStoffel1 · 11-24-2014

ciscoasa# show verCisco Adaptive Security Appliance Software Version 8.2(5)Device Manager Version 6.4(5)Compiled on Fri 20-May-11 16:00 by buildersSystem image file is "disk0:/asa825-k8.bin"Config file at boot was "startup-config"ciscoasa up 4 days 1...

WStoffel1 · 05-16-2014

sysopt connection tcpmss 1000 still same result. i've opened a ticket with the carrier, still pending on that. but I can see icmp requests from the remote end, pass my asa, the device responds, i see the icmp reply and then it appears to drop when ...

Member Since	‎11-24-2006 08:25 AM
Date Last Visited	‎10-09-2017 01:29 PM
Posts	153
Total Helpful Votes Received	5

User Statistics

User Activity

PFS issue with multiple remote subnets

Botnet filtering 8.2, no license :)

ASA 5505 with THREE wan links, no load balancing

L2L tunnel up, not passing traffic...all of a sudden

Bond two VDSL connections with dual EHWIC-VA-DSL-A?

Good enough for me, it is

Thank you...it has helped

Meaning updated code would

ciscoasa# show verCisco

sysopt connection tcpmss 1000