Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
On an AS5350 with ios 12.3.3a "show isdn active" prints only a few calls. Right now, one of my gateways reports 3 calls on "show isdn active" but I see there are 15 active layer 3 calls on one E1 interface with "show isdn status". This is a bug guys....
I don't know if this is the right place to post this, but I have the following problem:On an AS5350 with ios 12.3.3a with 2 E1s when I try to make an E1 link on the second port I get the error %DSX1-1-FIRMWARE_STOPPED: T1/E1 Firmware in slot 3 is no...
Hello,I have some AS5350 voice gateways using an dummy radius server which has one "little" bug. It can be configured for a auth to listen on one port and for acct on another port, but, when a packet hits it having any source udp port of the sender I...
Hi, My problem is that in versions prior to 12.2(11)T, when the gateway issued a radius authentication request, the packet had the source port 1645, but in the newer IOS releases (including 12.3) the port varies (it starts by sending auth requests wi...
Oh... that's because your carrier does not forward clid (caller id) information. It's normal to be like that. Anyway, it seems to me that you have a security problem because the call is on pid 0, that's a default dial-peer wich is not ok, and anyone ...
Hello, I had the same problem with an AS5350 using IOS from 12.2.13T to 12.3.3a. Check this bug out :CSCdz87218 Symptoms: A router may start dropping calls that have the "0x2C" cause code. The cause code indicates that the requested circuit or channe...
Your problem is in the destination-pattern of the dial-peer. Percent sign (%), which indicates that the previous digit/pattern occurred zero or multiple times, similar to the wild card usage in the regular expression. You should have destination-patt...
I found the explanation after I got the error. Anyway in 4 hours I found 4 bugs in IOS 12.3.3a .. I will open tac cases for everyone probably later ... I still have issues to solve with the new IOS. Thanks anyway ... if you wanna chat - lucian@glob...
