Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello all, The transparent redirection term first implied to me that the client will be totally unaware of the presence of a WSA proxy, however i delpoyed the following setup and found that the client is receiving HTTP proxy-redirect message (code 30...
Hi, You should pat them to one IP and configure it as an interesting traffic of the tunnel. I assume that there IPs will only initiate traffic.You may use the followign:object network LOCAL-HOSTS host 192.168.1.214 host 192.168.1.215 host 192.168.1.2...
Hi Siraj,It looks like the problem you described in the reply is different from the VPN problem.For the problem of not being able to successfully exchange TCP while ICMP is working, this is most likely because of asymmetric routing between the two vl...
Hi Siraj,Please provide:route print (from an internal PC)show ip route (from the switch)show route (from the ASA)Traceroute from an internal PC to a VPN client IP.and let's know about the VPN pool subnet, and the internal subnet.Regards.Mashal Shboul
Hi,Netflow is the right choice to monitor traffic rates and build baselines. See this Doc:https://supportforums.cisco.com/docs/DOC-6113Regards.Mashal Shboul
Hi Mustafa,The output of "show asp drop" is cumulative. So you need to clear the counters "clear asp drop" then try to observe a baseline and any abnormally increasing counters.I suggest that you collect the ASP drop captures and match them to the re...
