About oliversh54

oliversh54 · 05-13-2015

If you have vCenter Server with the vCenter Hardware Status Plug-in enabled, you can find the CIMC IP of a UCS-C ESXi Host from the vSphere Client. Connect the vSphere Client to the vCenter Server, open the Hosts and Clusters view, highlight the ESX...

oliversh54 · 09-13-2013

On CUC 8.6.2ES44.22900-44 we had the same issue. After the message was listened to in its entirety via the TUI, it was still not marked as read and the MWI of course stayed on until the user selected Save or Delete option.We followed Kapil's recommen...

oliversh54 · 08-13-2013

The 2901 should not inform the phones to register back to the CUCM.From the SRST System Administrator Guide:In SIP phone load 8.0 and later versions, SIP phones use keepalive to maintain a connection with Cisco Unified SRST during active registration...

oliversh54 · 11-01-2010

We have a pair running CU7.0(2)_ES21.We configured a subscriber for Pager Notification.When a new message was left, we were getting the following error and seeing no activity on the notification ports:Event Type: ErrorEvent Source: CiscoUnity_AvCsEve...

Member Since	‎04-16-2006 01:46 PM
Date Last Visited	‎08-11-2021 12:03 AM
Posts	4
Total Helpful Votes Received	30

User Statistics

User Activity

If you have vCenter Server

Unity connection V8 - MVI not off after msg read

SIP Phones don't re-register on CUCM after SRST finished

Re: Unity Pager Notification failure