Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
dear all,
recently i have installed the ISE ver 2.0 and i have downloaded the base evaluation license and also the adv evaluation license from www.cisco.com/go/license but all is working but the device admin is not yet licensed so can anyone help me...
dear all, i have configured my switch to support dot1x on each port but some of the ports after restarting the pc or laptop its not working the dot1x in each port is below. interface GigabitEthernet1/0/19 description Client Access EndPoint switchport...
dear alli have phone 7945G and i want to configure the correct timezone which is for our country Kabul Afghanistan and the its +04 30 so can any body help me how to configure this.. in my SEP.cnf.xml file in <timeZone></timeZone> secionregards
dear alli have some cisco 7945 phones when i call one extension to another and it rings after 3 or 4 seconds when i end call still the call is alerting on the incoming phone and i have to forcely end the call its not doning that automaticly can someb...
dear alli have cisco phone 7945 and when i dial one extenstion to another one i have sip protocol with asterisk they are connected but it takes 4 to 5 secconds to dial the number can any body tell me how should i solve this problem.regards
dear brother. i have checked both the domain and acs configs there is no issues or errors. the only things is that clients should authenticate after they logeding to their pc or laptop with their domain username and password, but after they login the...
Jaspher,1. you need to create your users inside the ACS local user database2. then join the cisco devices with acs so that acs and cisco devices talk with each otherthis is how acs and cisco devices work together.what do you want to configure acs for...
Jaspher,you can either join it to domain and also you cant join it to the domain.it is your your wish but you have to have users inside the acs localy in order to authenticate with the ACS 5.4Feel free to contact if you have question regarding ACS 5....
Hay guys I fixed that up perfectly and works perfect with asterisk system now any body needed help ready to support Sent from Cisco Technical Support iPad App
