About maquan_cco

maquan_cco · 06-29-2015

Dear friends,Some problems need your help, I'll try my best to describe it totally and briefly.Voice gateway : Cisco 2911 V/K9PRI :T1 PRI, pri-group timeslots 1-7 service mgcp.The ISP just provide us 7 channels from 1-7, ascending. All the configurat...

maquan_cco · 06-26-2013

Hi，EveryoneI am facing some issues with the backlight dislpay in cisco 7970G and 7965G phone. My Router is 2811 ,CME is 7.1 version. I want all the phones to turn off the backlight dislpay after 1 minute. I have did some mentioned under and there i...

maquan_cco · 07-06-2015

I have tried that and then reload the voice gateway. The PRI timeslots didn't change again ! Thank you !

maquan_cco · 06-30-2015

Of course I saved the config every time.associated voice config:card type t1 0 0network-clock-participate wic 0network-clock-select 1 T1 0/0/0controller T1 0/0/0 cablelength long 0db pri-group timeslots 1-7,24 service mgcpinterface Serial0/0/0:23 no ...

maquan_cco · 06-30-2015

As I said in the problem description, the 1-7 channels are ascending, I have already added this command under respective serial interface. As the channel config always change when power off or reload. that's not the calling problem, how I debug isdn ...

maquan_cco · 06-30-2015

it is already configured MGCP manually.

maquan_cco · 06-30-2015

I have tried to remove that command but problem still exists.IOS version: Version 15.1(4)M3Thank you.

Member Since	‎05-27-2007 11:56 PM
Date Last Visited	‎08-18-2017 04:03 AM
Posts	10

User Statistics

User Activity

some problems about TI PRI channel

7965G and 7970G no switch backlighit

I have tried that and then

Of course I saved the config

As I said in the problem

it is already configured MGCP

I have tried to remove that