Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,Does Cisco have the support for this ?What I mean is, a hub is connected to a Cisco switchport (in access port mode).802.1x is enabled on this port.User A gets authentincated and gets assigned to VLAN X by Radius Server.Then User B gets authen...
Hi all,I know that N7K did not have N+1 Switch Fabric redundancy. It is required to have all five SF modules to provide full throughput. Does this change with FAB-2 modules ? I mean with new modules, does N7K have N+1 SF redundancy ?Thanks in advance...
Hi all,We are in the project initiation phase in a huge Cisco NAC deployment. Customer has 8 regional offices which are gonna be deployed in L2 OOB mode with its own NAC Servers.Customer also hast 25 small offices which are gonna be deployed in L3 O...
Hi,I am using a Nexus 5000 vPC environment with NX-OS 5.0.3.N1.1c. Just one edge switch (C3569) is connected to N5Ks as a vPC using LACP as channel protocol. I have used system-mac 0001.0010.0010 command under vpc on N5Ks. Weird thing is , C3560 sees...
Hi,I couldnt seem to find a way to add multiple DCs to Cisco ACS 5.2 , all it requires in the ACS GUI is input the Domain Name ? Are we limited to add the root DC /forest ? I am not a Microsoft Expert ... I also couldnt figure out how ACS finds the ...
I guess it should. Just found this Document Guide :Cisco Nexus 1000V Series Switches Deployment Guide Version 2 Deployment Guide (guide_c07-556626_v2.pdf)And it is stated as : When multiple uplinks are attached to the same subgroup, the upstream swit...
In manual and auto subgroup id options ; isnt seperate static port channel configuration needed on the upstream switches ? Like a static port channel on left upstream switch, and a SEPERATE static port channel on the right upstream switch.Otherwise, ...
Hi,I have already gone through that document. The problem is,I got two options in order to redirect the NAC agents traffic from the small offices to the NAC server which is located at HQ. Using PBRUsing ACL and Discovery Host FieldWe prefer the secon...
Hi Ruhan,Ive read these notes before. Thanks for mentioning. The thing is 3560 was connected to the pair of N5Ks through a vPC. That is why I expect to see the same Bridge ID on 3560. However when I reboot the Operational Primary vPC peer (N5K-1) (...
