The RV220W is EOL. The RV130W will not support multiple public IP's. Can anyone recommend a Cisco Small Business Wireless Router that will support multiple public IP's?   TIA ... View more

  I am attempting to configure a Cisco UC-540 (latest software) for use with Nextiva's SIP service using CCA.   Nextiva only provides the following docs and no other configuration support. http://www.nextiva.com/support/how-do-i-register-my-pbx-to-nextivas-sip-trunking-server.html   I have tried multiple variations of the settings and I am still unable to make or receive calls, even after rebooting.   Any help appreciated. ... View more

I am trying to access my UC540 (latest software) to (re)record a new AA prompt. If I dial the main number, then 397/398/399, I get "Invalid ID". How can I admin prompts remotely (i.e. to record a temporary weather closure message)? ... View more

A client is requried to join a conference call hosted by third-party Genesys Conferencing (866.436.3797). My client accesses the teleconference through the speakerphone of their Cisco SPA525G2, lcoated in a Board Room.  They have a UC-540 with the next to lates firmware and they have no other volume issues with any call on this or any other speakerphone. Any ideas? ... View more

My environment consists of Comcast cable internet with 5 static IP's. I have a MSFT SBS 2003 server with Exchange with a static IP of 192.168.36.10 Wireless notebooks are able to work and surf with no issues. Wired LAN clients have no issues. iPhones are unable to send and receive email only when connected to the RV220W's wireless. When connected via the cellular carrier, using the same settings, they work fine. The iPhone is getting the following info via DHCP and Wireless Isolation is DISABLED; IP 192.168.36.103 SM 255.255.255.0 DNS 192.168.36.10 The exchange server is set to allow connections and relay from 192.168.36.1/255.255.255.0 Any ideas? ... View more

It appears as if you cant change the AA Alternate Greeting remotely. An example would be if a business was closed due to snow and a manager wanted to call in and leave an alternate AA greeting that the office was closed for the day, but staff would be available via Cisco SBCS. I called the main inbound number, got the AA, then tried #, *, 397, 398, 399. Nothing works. Does this have to be configured first in some way? It does not seem intuitive. TIA                   ... View more

A VOIP provider uses a 74.122.242.0/24 network range for incoming and outgoing VOIP services. Their setup documents request that we allow the entire range. Typical of Cisco, the CCA only allows individual IP addresses to be entered. Can someone inform me of a way to add the entire /24 without having to enter each address into the CCA individually? ... View more

Which version of Cisco AnyConnect software do I have to download in order to upload it to the UC540 in order to put the UC540 in FULL TUNNEL mode so that remote teleworkers with a SPA525G2 can connect via VPN? PS: And if the phones have a BUILT-IN VPN Client, why do I have to upload a VPN software packagae to the UC540 at all? PPS: Why doesnt the link to the Cisco AnyConnect software in CCA 3.2.1 work?              ... View more