Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
hi,I've got a problem language settings using a CME 3.3 system with phone types 7912,7920,7940,7960.I configured locale settings to german and 7912 as well as 7920 phones show the correct softkeys and menu entries, but on the 7940/60 phones the softk...
I have a phone configured with two extensions (button 1:0, button 2:10);what I want is that a call is forwarded to a hunt group as soon as there is a call on one of the two lines (0 or 10).how can I do this?thanks,stefan
Hi Javier,the link above didn't work for me, I had to manually change to https for reaching the files.https://upload.cisco.com/cgi-bin/swc/fileexg/main.cgi?CONTYPES=wng-escalation Regards,Stefan
Hi Robin,you need to send the "service-type" atttribute to the controller.value "administrative" = read/writevalue "nas prompt" = read onlyhope that helps,Stefan
Hi Tobias,you need to enable FlexConnect Local Authentication on the SSID (advanced settings).Typically you put the FlexConnect APs in a Flex Group and assign the RADIUS servers there (but don't enable "Local Authentication" on the group, it's a tota...
Seems that they removed the NCS trial from the list of available demo licenses.Anyway, why do you want to test NCS, which is actually an outdated piece of software? I would recommend to test its successor Prime Infrastructure (current version 1.3) - ...
