Dear All, Appreciate your kind support with this issue, I have 12 device of LAP 1552CU not working with 12 power injector AIR-PWRINJ1500-2= when ever I plug the cable from the power injector to the AP it's not working Please advice Thanks in Advanced, Ahmed ... View more

Hi All, Hope to you a very happy new year, I have an (AIR-CAP3602i-E-K9) and I tried to join it to WLC 5508 but I'm facing an error, I get this error from the LAP 1310 console as below: Reading cookie from SEEPROM Base Ethernet MAC address: 60:73:5c:ad:cb:9c Boot CMD: 'boot  flash:/ap3g2-rcvk9w8-mx/ap3g2-rcvk9w8-xx;flash:/ap3g2-rcvk9w8-mx/ap3g2-rcvk9w8-mx' Loading "flash:/ap3g2-rcvk9w8-mx/ap3g2-rcvk9w8-xx"...##################### File "flash:/ap3g2-rcvk9w8-mx/ap3g2-rcvk9w8-xx" uncompressed and installed, entry point: 0x2003000 executing...               Restricted Rights Legend Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013.            cisco Systems, Inc.            170 West Tasman Drive            San Jose, California 95134-1706 Cisco IOS Software, C3600 Software (AP3G2-RCVK9W8-M), Version 15.2(2)JA, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2012 by Cisco Systems, Inc. Compiled Thu 23-Aug-12 02:43 by prod_rel_team Initializing flashfs... flashfs[2]: 6 files, 3 directories flashfs[2]: 0 orphaned files, 0 orphaned directories flashfs[2]: Total bytes: 31997952 flashfs[2]: Bytes used: 7015936 flashfs[2]: Bytes available: 24982016 flashfs[2]: flashfs fsck took 9 seconds. flashfs[2]: Initialization complete. flashfs[3]: 0 files, 1 directories flashfs[3]: 0 orphaned files, 0 orphaned directories flashfs[3]: Total bytes: 12257280 flashfs[3]: Bytes used: 1024 flashfs[3]: Bytes available: 12256256 flashfs[3]: flashfs fsck took 0 seconds. flashfs[3]: Initialization complete....done Initializing flashfs. This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to export@cisco.com . Warning:  the compile-time code checksum does not appear to be present. cisco AIR-CAP3602I-E-K9    (PowerPC) processor (revision A0) with 180214K/81920K bytes of memory. Processor board ID FCZ1642J01K PowerPC CPU at 800Mhz, revision number 0x2151 Last reset from power-on LWAPP image version 7.3.1.73 1 Gigabit Ethernet interface 32K bytes of flash-simulated non-volatile configuration memory. Base ethernet MAC Address: 60:73:5C:AD:CB:9C Part Number                          : 73-14521-02 PCA Assembly Number                  : 800-37501-02 PCA Revision Number                  : A0 PCB Serial Number                    : FOC16352BJ0 Top Assembly Part Number             : 800-35852-02 Top Assembly Serial Number           : FCZ1642J01K Top Revision Number                  : C0 Product/Model Number                 : AIR-CAP3602I-E-K9 % Please define a domain-name first. logging facility kern         ^ % Invalid input detected at '^' marker. logging trap emergencies         ^ % Invalid input detected at '^' marker. logging facility kern         ^ % Invalid input detected at '^' marker. logging trap emergencies         ^ % Invalid input detected at '^' marker. Press RETURN to get started! *Mar  1 00:00:10.355: %LWAPP-3-CLIENTERRORLOG: Config load from flash failed. Initialising Cfg *Mar  1 00:00:11.971: %LINK-6-UPDOWN: Interface GigabitEthernet0, changed state to up *Mar  1 00:00:12.575: %SYS-5-RESTART: System restarted -- Cisco IOS Software, C3600 Software (AP3G2-RCVK9W8-M), Version 15.2(2)JA, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2012 by Cisco Systems, Inc. Compiled Thu 23-Aug-12 02:43 by prod_rel_teamlwapp_crypto_init: MIC Present and Parsed Successfully *Mar  1 00:00:13.603: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up *Mar  1 00:00:15.387: DPAA Initialization Complete *Mar  1 00:00:15.387: %SYS-3-HARIKARI: Process DPAA INIT top-level routine exited *Mar  1 00:00:15.979: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up no bridge-group 1 source-learning                    ^ % Invalid input detected at '^' marker. %Default route without gateway, if not a point-to-point interface, may impact performance *Mar  1 00:00:32.327: %CDP_PD-2-POWER_LOW: All radios disabled - NEGOTIATED WS-C2960S-48FPD-L (10bd.18a5.6082) *Mar  1 00:00:48.579: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.114.42.204, mask 255.255.255.128, hostname AP6073.5cad.cb9c Translating "CISCO-CAPWAP-CONTROLLER"...domain server (10.114.44.129) (8.8.8.8) *Mar  1 00:00:59.459: %CAPWAP-5-DHCP_OPTION_43: Controller address 10.114.44.131 obtained through DHCP *Mar  1 00:00:59.459: %CAPWAP-3-ERRORLOG: Did not get log server settings from DHCP. *Mar  1 00:01:00.015: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER *Mar  1 00:01:00.015: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'CIR906.WLC.5508'running version 7.0.235.3 is rejected. *Mar  1 00:01:00.015: %CAPWAP-3-ERRORLOG: Failed to decode discovery response. *Mar  1 00:01:00.015: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 2 state 2. *Mar  1 00:01:00.015: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller *Mar  1 00:01:00.015: %CAPWAP-3-ERRORLOG: Failed to process unencrypted capwap packet from 10.114.44.131 *Mar  1 00:01:10.015: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'CIR906.WLC.5508'running version 7.0.235.3 is rejected. *Mar  1 00:01:10.015: %CAPWAP-3-ERRORLOG: Failed to decode discovery response. *Mar  1 00:01:10.015: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 2 state 2. *Mar  1 00:01:10.015: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller *Mar  1 00:01:10.015: %CAPWAP-3-ERRORLOG: Failed to process unencrypted capwap packet from 10.114.44.131 *Mar  1 00:01:20.015: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'CIR906.WLC.5508'running version 7.0.235.3 is rejected. *Mar  1 00:01:20.015: %CAPWAP-3-ERRORLOG: Failed to decode discovery response. *Mar  1 00:01:20.015: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 2 state 2. *Mar  1 00:01:20.015: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller *Mar  1 00:01:20.015: %CAPWAP-3-ERRORLOG: Failed to process unencrypted capwap packet from 10.114.44.131 *Mar  1 00:01:30.015: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'CIR906.WLC.5508'running version 7.0.235.3 is rejected. *Mar  1 00:01:30.015: %CAPWAP-3-ERRORLOG: Failed to decode discovery response. *Mar  1 00:01:30.015: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 2 state 2. *Mar  1 00:01:30.015: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller *Mar  1 00:01:30.015: %CAPWAP-3-ERRORLOG: Failed to process unencrypted capwap packet from 10.114.44.131 *Mar  1 00:01:32.343: %CDP_PD-2-POWER_LOW: All radios disabled - NEGOTIATED WS-C2960S-48FPD-L (10bd.18a5.6082) *Mar  1 00:01:40.015: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'CIR906.WLC.5508'running version 7.0.235.3 is rejected. *Mar  1 00:01:40.015: %CAPWAP-3-ERRORLOG: Failed to decode discovery response. *Mar  1 00:01:40.015: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 2 state 2. *Mar  1 00:01:40.015: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller *Mar  1 00:01:40.015: %CAPWAP-3-ERRORLOG: Failed to process unencrypted capwap packet from 10.114.44.131 Not in Bound state. *Mar  1 00:01:55.515: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP. *Mar  1 00:02:02.519: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 2 combination. *Mar  1 00:02:02.555: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.114.42.205, mask 255.255.255.128, hostname AP6073.5cad.cb9c Translating "CISCO-CAPWAP-CONTROLLER"...domain server (10.114.44.129) (8.8.8.8) *Mar  1 00:02:06.515: %CAPWAP-5-DHCP_OPTION_43: Controller address 10.114.44.131 obtained through DHCP *Mar  1 00:02:06.515: %CAPWAP-3-ERRORLOG: Did not get log server settings from DHCP. *Mar  1 00:02:06.631: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER *Mar  1 00:02:06.631: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'CIR906.WLC.5508'running version 7.0.235.3 is rejected. *Mar  1 00:02:06.631: %CAPWAP-3-ERRORLOG: Failed to decode discovery response. *Mar  1 00:02:06.631: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 2 state 2. *Mar  1 00:02:06.631: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller *Mar  1 00:02:06.631: %CAPWAP-3-ERRORLOG: Failed to process unencrypted capwap packet from 10.114.44.131 *Mar  1 00:02:16.631: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'CIR906.WLC.5508'running version 7.0.235.3 is rejected. *Mar  1 00:02:16.631: %CAPWAP-3-ERRORLOG: Failed to decode discovery response. *Mar  1 00:02:16.631: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 2 state 2. *Mar  1 00:02:16.631: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller *Mar  1 00:02:16.631: %CAPWAP-3-ERRORLOG: Failed to process unencrypted capwap packet from 10.114.44.131 *Mar  1 00:02:26.631: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'CIR906.WLC.5508'running version 7.0.235.3 is rejected. *Mar  1 00:02:26.631: %CAPWAP-3-ERRORLOG: Failed to decode discovery response. *Mar  1 00:02:26.631: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 2 state 2. *Mar  1 00:02:26.631: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller *Mar  1 00:02:26.631: %CAPWAP-3-ERRORLOG: Failed to process unencrypted capwap packet from 10.114.44.131 Please Advise, Thanks in Advanced, Ahmed, ... View more

Hi All, Hope to you a very happy new year, I have an (AIR-LAP1310G-E-K9R) and I tried to join it to WLC 5508 but I'm facing an error, I get this error from the LAP 1310 console as below: Compiled Mon 17-Jul-06 11:45 by alnguyen *Mar  1 00:00:05.289: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up *Mar  1 00:00:06.289: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to up *Mar  1 00:00:23.337: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY *Mar  1 00:00:33.477: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned DHCP address 10.114.36.25, mask 255.255.255.0, hostname APe4d3.f1c2.8882 examining image... *Mar  1 00:00:44.781: %LWAPP-5-CHANGED: LWAPP changed state to JOIN *Jan 11 15:21:37.178: %LWAPP-5-CHANGED: LWAPP changed state to IMAGE %Error opening  (Protocol error)archive download: takes 6 seconds *Jan 11 15:21:43.178: LWAPP_CLIENT_ERROR_DEBUG:  Retransmission count for packet exceeded more than max(IMAGE_DATA , 1) *Jan 11 15:21:43.178: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY *Jan 11 15:21:43.179: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY *Jan 11 15:21:43.181: LWAPP_CLIENT_ERROR: not receive read response(3) *Jan 11 15:21:43.185: lwapp_image_proc: unable to open tar file *Jan 11 15:21:43.200: %SYS-5-RELOAD: Reload requested by lwapp image download proc. Reload Reason: Reason unspecified. *Jan 11 15:21:43.201: %LWAPP-5-CHANGED: LWAPP changed state to DOWN *Jan 11 15:21:43.207: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERYXmodem file system is available. flashfs[0]: 3 files, 2 directories flashfs[0]: 0 orphaned files, 0 orphaned directories flashfs[0]: Total bytes: 7741440 flashfs[0]: Bytes used: 1861632 flashfs[0]: Bytes available: 5879808 flashfs[0]: flashfs fsck took 14 seconds. Base ethernet MAC Address: e4:d3:f1:c2:88:82 Initializing ethernet port 0... Reset ethernet port 0... Reset done! ethernet link up, 100 mbps, full-duplex Ethernet port 0 initialized: link is up Loading "flash:/c1310-rcvk9w8-mx/c1310-rcvk9w8-mx"...####################################################################################################################################################################### File "flash:/c1310-rcvk9w8-mx/c1310-rcvk9w8-mx" uncompressed and installed, entry point: 0x3000 executing...               Restricted Rights Legend Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013.            cisco Systems, Inc.            170 West Tasman Drive            San Jose, California 95134-1706 Cisco IOS Software, C1310 Software (C1310-RCVK9W8-M), Version 12.3(11)JX1, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2006 by Cisco Systems, Inc. Compiled Mon 17-Jul-06 11:45 by alnguyen Image text-base: 0x00003000, data-base: 0x00359EA0 Initializing flashfs... flashfs[1]: 3 files, 2 directories flashfs[1]: 0 orphaned files, 0 orphaned directories flashfs[1]: Total bytes: 7741440 flashfs[1]: Bytes used: 1861632 flashfs[1]: Bytes available: 5879808 flashfs[1]: flashfs fsck took 2 seconds. flashfs[1]: Initialization complete....done Initializing flashfs. cisco AIR-LAP1310G-E-K9R   (PowerPCElvis) processor (revision B0) with 24566K/8192K bytes of memory. Processor board ID FGL1649T00U PowerPCElvis CPU at 262Mhz, revision number 0x0950 Last reset from reload LWAPP image version 3.0.51.0 1 FastEthernet interface 32K bytes of flash-simulated non-volatile configuration memory. Base ethernet MAC Address: E4:D3:F1:C2:88:82 Part Number                          : 73-8960-09 PCA Assembly Number                  : 800-24963-06 PCA Revision Number                  : B0 PCB Serial Number                    : FOC16447J1K Top Assembly Part Number             : 800-28479-05 Top Assembly Serial Number           : FGL1649T00U Top Revision Number                  : D0 Product/Model Number                 : AIR-LAP1310G-E-K9R Press RETURN to get started! *Mar  1 00:00:04.329: %SYS-5-RESTART: System restarted -- Cisco IOS Software, C1310 Software (C1310-RCVK9W8-M), Version 12.3(11)JX1, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2006 by Cisco Systems, Inc. Compiled Mon 17-Jul-06 11:45 by alnguyen *Mar  1 00:00:05.289: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up *Mar  1 00:00:06.289: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to up *Mar  1 00:00:23.337: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY *Mar  1 00:00:33.352: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned DHCP address 10.114.36.28, mask 255.255.255.0, hostname APe4d3.f1c2.8882 examining image... *Mar  1 00:00:44.783: %LWAPP-5-CHANGED: LWAPP changed state to JOIN *Jan 11 15:21:37.189: %LWAPP-5-CHANGED: LWAPP changed state to IMAGE %Error opening  (Protocol error)archive download: takes 6 seconds *Jan 11 15:21:43.189: LWAPP_CLIENT_ERROR_DEBUG:  Retransmission count for packet exceeded more than max(IMAGE_DATA , 1) *Jan 11 15:21:43.189: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY *Jan 11 15:21:43.189: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY *Jan 11 15:21:43.192: LWAPP_CLIENT_ERROR: not receive read response(3) *Jan 11 15:21:43.195: lwapp_image_proc: unable to open tar file *Jan 11 15:21:43.210: %SYS-5-RELOAD: Reload requested by lwapp image download proc. Reload Reason: Reason unspecified. *Jan 11 15:21:43.210: %LWAPP-5-CHANGED: LWAPP changed state to DOWN *Jan 11 15:21:43.216: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERYXmodem file system is available. flashfs[0]: 3 files, 2 directories flashfs[0]: 0 orphaned files, 0 orphaned directories flashfs[0]: Total bytes: 7741440 flashfs[0]: Bytes used: 1861632 flashfs[0]: Bytes available: 5879808 flashfs[0]: flashfs fsck took 14 seconds. Base ethernet MAC Address: e4:d3:f1:c2:88:82 Initializing ethernet port 0... Reset ethernet port 0... Reset done! ethernet link up, 100 mbps, full-duplex Ethernet port 0 initialized: link is up Please Advise, Thanks in advanced, Ahmed, ... View more