Dear All,find the below out put from Core switch 6509 cpu utilization very high, no network changes has been made FAI_CentralBuilding_CORE#sh processes cpu | exclude 0.0CPU utilization for five seconds: 99%/47%; one minute: 99%; five minutes: 100%PID...
Hi All,Thanks in advance ,in my organisatin we are facing one issue with launching of ASDM in ASA 5520 , when wer are trying to access the Firewall through ASDM we are unable to access that , see the java error loggs below , yes i ...
Dear All,Thanks in Advance for your support, I have two WLC 5508 (AIR-CT5508-25-K9) i want to configure failover between them and i have 25 access points AIR-LAP1141N-E-K9802.11g/n Controller-based AP; Int Ant; ETSI Cfg15AIR-CAP1552E-E-K9802.11a,b/g ...
Dear All thanks in Advance ,i configured the VLAN810, with DHCP services, while i try to ping the host which is connected to gi 1/0/2 from my gi 1/0/1 , i can't ping the same vlan host , while i try to debug ip icmp its showing ,(C3750XB11#sh ru...
Hi All,sh processes cpu history, What is the Cause of this problem, becuase of this Network is getting down in entire network, 6668966666756922212222124422212222222122222222222222122122 1210938912210656383872837721491432223864124205354827445540...
Dear Rollen,
After physical wiring done from Parent switch eg. N7k or N5k to Fex , just issue the command Feature Fex , and wait for one minute then check sh fex , fex should be in discover mode , if not in discover then there is a problem in physic...
Dear Fabien, close to solution , check your first post pic and second post pictry to check on win 7 32. bit and see the attached file try it out and update rete it if help fullBRSYED
Dear Richard,find the below link to upgrade the ios from cisco documents for Stack wise switches, http://www.cisco.com/c/en/us/support/docs/switches/catalyst-3750-series-switches/64898-upgrade-3750-stack.htmlmake sure you follow all steps,use one of ...