Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dears I recive this message in my fwsm when I try to connect to a SQL server %FWSM-6-106028: Deny TCP (Connection marked for Deletion) from 10.110.12.11/61245 to 10.110.80.12/1433 flags SYN on interface outside_SAPCRMI read about this error and i in...
Dears ,I wannt to recover the enable pasword of the FWSMis this the correct procedure :Router# hw-module module slot-number reset cf:1Router# session slot slot-number processor 1Log into Root.root@localhost# clear passwd cf:partition_numberroot@local...
dearskindly why the nexus 2k has 8 uplink ports ????My opinion and plz correct me ..... thats because the nexus 7k or 5k can be devided into 4 virtual devices ( using vdc)and making 8 uplink ports in the 2k will allow us to use the extender for all ...
Dears kindly we know that the ip default gateway is used for L2 switchnow if we have a layer 2 switch with ip default gateway and we activated layer 3 functionality on it , and configured a defualt route like this :ip default gateway x.x.x.xip rout...
yes mahmood but I faced it when I issued the command copy run start in a vdc ....the follwoing message appeared :Configuration update aborted: This vdc has had a global configuration change since the last saved config. Please save config in defaul...
dearkindly what is the diference between configuring the managment interface of the nexus switch with :interface mgmt 0ip address 192.168.0.100/24and configuring it with the old way : interface vlan 1ip address 192.168.0.100
Thanx for ur replyok , but regarding to nexus switches , there is no ip default gateway command ...so what is the alternative commandother than configuring it by the dialoge
