Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Again trying to use and like CSM but it's always fighting me in one way or another and I usually end up manually upgrading.Running 4.4.1 and trying to build a GISO.Loaded 7.3.2 files from CCO via CSM - ok, good.Using the GISO wizard, they're labeled ...
Curious if anyone might have some insight on a BGP session setup problem I'm seeing. I'm having trouble bringing up a BGP peering session between IOS-XR VRF and IOS.[ IOSXR_PeerA (VRF)-----IOSXR(Global) ]---(internal network, 3 hops)---IOS_PeerB Pe...
Anyone know how to set IFE port-group to 1G on a A9K-24X10GE-1G-TR ? Seeing this module's ports are configured in IFE port-groups(https://www.ciscolive.com/c/dam/r/ciscolive/emea/docs/2018/pdf/BRKARC-2003.pdf) After significant searching I can't fin...
I'm suddenly having an issue with CSM where it cannot log into my 9k hosts using ssh.I have no issue using the same account SSH'ing directly to the host.By symptom it appears a password issue, but I've verified the password and tried a few different ...
Hi all - I'm looking to install CSM 3.5.1. I'm assuming it needs to communicate with CCO, but I don't see any sort of firewall port list mentioned in the install guide to enable that. If needed, does anyone know or have a pointer where that info can...
I also had two RSPs showing the same System Scoped Alarm error."Error in device/link [10b5:8749 09:05.0]: Pcie uncorrectable surprise down error"I note the numbers are the exact same and match yours as well. Reseating the affected RSPs did not resolv...
I've no answer but just chiming in that after upgrading two 9906s to 7.3.2, I have RSPs showing the same System Scoped Alarm error."Error in device/link [10b5:8749 09:05.0]: Pcie uncorrectable surprise down error" I note the numbers are the exact sam...
Spidey sense thinking this issue is XR LPTS related. RP/0/RSP1/CPU0:#show lpts pifib entry brief location 0/0/CPU0 | in 10.0.0.10 *All looks correct ; at least system awareFri Jan 17 09:09:44.963 ESTIPv4 <VRFname> TCP any 0/RSP1/CPU0 10.0.0.10,4733...
RP/0/RSP1/CPU0:#show bgp vrf xxx neighbor 10.0.0.13 detail | inc IDThu Jan 16 14:55:52.186 ESTRemote router ID 0.0.0.0 ** this would not be known until after 3-way handshake though , right?....Local host: 10.0.0.10, Local port: 0, IF Handle: 0x0...
