Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HI All,
We're trying to replicate an existing design in our legacy network in ACI and are experiencing some issues. In our legacy network, we used PBR on a pair of N7Ks to set the nexthop address of matching application traffic to a load-balancer....
Hi All,
Note that i've previously posted this question to the Application Networking sub-forum using a different account, however I haven't received any replies so I thought I'd repost it here.
My ACI multipod deployment consists of two pods, wit...
Hi All,
My ACI multipod deployment consists of two pods, with each pod having its own L3Out. Each L3Out contains a 0.0.0.0/0 external EPG.
I wish to create a second external EPG (e.g. Admin) containing the /32 IP addresses of certain systems and...
Hi, Is anyone else seeing this issue?
Seen on CE9.1.3, TC7.3.6, TC7.3.3
We have multiple reports of conference units Spark Room Kit, SX80, SX20 (SIP registered to VCS) showing a gray screen instead of the normal video output. When it occurs, displa...
Hi All
I've raised a request for a way to bulk monitor Touch 8/10 status since at the moment, there is no automatic alert for this
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCut27621
Was curious if others would see this as a useful feature (I'...
Hi Marcel,
In configuring a stretched L3Out over both PODs, is there any way in which to then control which BDs/networks are advertised to which L3Out peers?
For example; I would prefer to advertise a network "local" to POD 1 to L3Out peers attac...
Bump - really kind of surprised that there does not appear to be a way in which to consistently classify external EPG subnets to enforce contracts in ACI regardless of which L3Out those endpoints ingress form.
Hi Cesar,
Do you have a similar CASP1.6.0.4_SecurityPatch file for sntc cli access in version 2.6. I used the patch to get 2.5 admin cli working and it worked well. I've since upgraded to 2.6 via the cli and now have the same issue back.
I tried r...
There's a DB9 for serial control of cameras. PHD1080p12x and PHD720p both worked for when I tried with the SX80Use the same pin-out for camera cable as you would for a C60, will need separate power supply for the camera though, as there's no DC powe...
Correction: Disabling POE (power inline never) on the network switch PORT does seem to resolve the issue for us, and pairing with C90, C60, C20, SX20 seems to work again.(we just disabled POE on the ports which had Touch 8 or vid conf endpoint, we di...
