Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm sure this may have been addressed but I'm having trouble finding documentation for this scenario. Let's say you do setup OTV for two data centers with the intention to extend a vlan across both. Let's say we populate this with a /24 subnet s...
I'm deploying a setup where I'll have a pair of 2232TM-E switches in a single rack (servers have the option to run data connections to both) which are going to then be uplinked to a pair of 5548UPs near my 7K cores using FET. My confusion comes fro...
I need cheaper alternatives to connect the VPC peer links between my 7706 chassis (running F348XP-23 cards each). Twinax is a bit on the thick end and hard to manage space so I wanted to check if FET modules can be used on both ends of 7706 or are...
Hi all,In a case where my pre 8.3 NAT rules are as follows where I am NATing source IPs with their original IPs to get communication going between these various DMZs.static (INSIDE,DMZ1) 10.10.0.0 10.10.0.0 netmask 255.255.255.0 static (INSIDE,DMZ2) ...
to create a policy where you can define source destination and have any traffic matching that criteria to NOT generate a syslog entry? basically i have a particular legit traffic pattern where ANY to a particular public web server is generating tens ...
A bit late reply but what I discovered was that they don't log SVI statistics right out of the box and you need to shift TCAM resources around to do that. We had this problem with our 9500s and our 9300s.
http://www.cisco.com/c/en/us/td/docs/switche...
How many vlans are you going to be hosting on those switches? If you wish to firewall off intervlan communication, then what you can do is take the 3750 and use it as a layer 2 device and put the gateways onto the ASA firewalls. You can create sub...
Thanks, Steve. Any special consideration if using Fabricpath with 7K-5K like http://www.cisco.com/en/US/prod/collateral/switches/ps9441/ps9402/white_paper_c11-709336.htmlIn there they have the 2232's dual homed to the upstream 5548s.
