Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,
Need assistance with routing network between sub interface on the ASA. Right now, all my devices are in the infrastructure subnet (192.168.100.0/24) b/c i can't figure out how to get the ASA to route traffic between the vlan's on the sub inte...
Need some assistance with the new ASA-5506X for my home network. For some reason, i can no longer access the FirePower module via the ASDM. ASDM starts to load at stops at 17% (Initializing FirePOWER communication). Here is the error:Cannot connec...
Working on a project for a large customer & i need to add close to 3000 Switches in Network devices. Rather than add each switch, I would prefer to enter a wild card entry of 10.x.x.30 = Switches for example. When i did an import of 500+ switches,...
I have a customer looking to deploy OEAP & wants to know if it possible to disable the local ports 1-3? Reason being, they don't want the home user connecting devices & causing more support tickets to troubleshoot an Xbox or Google TV just b/c it's ...
Hey Andre,
Routing between networks in the sub interfaces is not working
I tried these commands & it's working somewhat but not everything. Ping between all subnets is working but i can't SSH or HTTPS to my devices on different subnets for reason.. ...
As per the Quick Start guide:Note: If you want to deploy a separate router on the inside network, then you can route between management and inside. In this case you can manage both the ASA and ASA Firepower module on the Management 1/1 with the appr...
Thanks Marvin, i left that out that it is also connected to the same switch on the same VLAN (i only have one vlan for now), however something is up with that port. I kept wondering why the m1/1 interface was down/down... I moved to a different por...
hey michael... while i could do 2 different L3 networks for a home network, i have devices that need to be on the same l2 network before they will communicate. For example, i have a Stereo receiver in which the app only works if the devices are on t...
Tarik,1.2 patch 5I have the import file correct b/c it let me import 1/4 of the devices... the issue was the network devices screen became incredibly slow. When i would try to scroll down it would take so long for the screen to refresh & all the net...
