Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
wlc 9800-CL and a registered C9130AXI-E (aptest1) & AIR-AP2802I-E (aptest2)At this moment we are in test fase for deploying C9130AX series AP's. The 9800-CL is running version 17.1.1s.1. The C9130AXI is not visible as a Dual-Band radio. The 2802I is....
Thanks for your help. I rebuild the mobility path again and now it works. Didn't have to reboot the controller.Used this manual:https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-9/config-guide/b_cg89/encrypted_mobility_tunnel.html
Thanks for this reply and your time, followed these steps: 9800-CL#conf tEnter configuration commands, one per line. End with CNTL/Z.9800-CL(config)#crypto pki certificate map map1 19800-CL(ca-certificate-map)#issuer-name co Cisco Manufacturing CA980...
Thanks for replying: You're right: always check your log files... After updating wlc 9800-CL (17.3.1) to 17.3.3 the mobility link with wlc Aireos 8.5.164.0 went down. Trying to rebuild it failed. Errors repeatedly on a 5508 wlc:2021-03-10T10:31:42.8...
Adding a thought, Is it possible that a 9130AX AP needs additional power. > 30W (802.3at PoE+)? (The specifications states that802.3af (15.4W) the radio's are 1x1)
