Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
IntroductionWhy show running-config does not give valid output on a lower privilege levelMore InformationThe issue faced is due to the design of the IOS. We can lower down the privilege levels of all the configuration and exec mode commands.However,...
IntroductionTo clear the whole confusion of proxy, I did some research and a recreate of a Proxy scenario and was able to collect some data.Lab SetupClient-->radius authentication request(ACCESS REQUEST)-->ACS(Proxy sender)-->External Radius Sever(...
Guna,Tacacs+ Does not use VSAs.Radius uses VSAs. This is what I found online:http://198.152.212.23/css/P8/documents/100106731See if this helps.It has an example associated for server configuration.In ACS 4, you need to use the shell exec and priv-lvl...
Hey,I doubt these shows up in accounting.You need to note that accounting is not processed the same way the authen/author request is processed.RegardsEd
Hey,ACS 5.5 has this.http://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_secure_access_control_system/5-5/release/notes/acs_55_rn.html#pgfId-300142RegardsEd
