04-10-2014 12:23 AM - edited 03-10-2019 09:37 PM
Dear All,
Can we add Nortel switches as AAA clients for ACS 4.2 using TACACS+ ?
If yes, Please suggest me how to configure.
Thanks in advance.
Regards,
Guna
04-14-2014 09:07 PM
Hey,
Does the Nortel switch support Tacacs+?
If yes, go ahead.
Most configuration is going to be on the switch end.
Regards
Ed
04-14-2014 11:37 PM
Hi edwjames,
Thanks for the update.
Yes Nortel switches support Tacacs+.
When i configure Nortel switch as aaa client, the connection status on the client is not coming up with aaa server.
Is there any VSA needed to configure on ACS 4.2 for supporting Nortel switches.
Thanks in advance.
Regards,
Guna
04-15-2014 09:20 AM
Guna,
Tacacs+ Does not use VSAs.
Radius uses VSAs.
This is what I found online:
http://198.152.212.23/css/P8/documents/100106731
See if this helps.
It has an example associated for server configuration.
In ACS 4, you need to use the shell exec and priv-lvl=<value>.
(Similar to Cisco IOS)
Regards
Ed
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide