Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
- Cisco Community
- :
- About Roger Saugestad
Stats
Member since
09-21-2011
11
Posts
0
Helpful
1
Solution
11-25-2014
12:37 AM
Hi This is good news, now we are able to track status on this bug. Roger
... View more
11-07-2014
01:29 AM
Hi Have you found a solution to this? I see the same isssue on WS-C4503-E chassis and WS-X45-SUP8-E supervisor and WS-X4640-CSFP-E linecards. When we move the linecards to a Sup6 device everything works as normal so I don's suspect there is something wrong with the hardware. Do you have problems with negotiating speed on the working Gig interfaces as well? I need to set 'speed nonegotiate' on the interfaces to get link, but 'sh int transceiver' shows both optical RX og TX signal. Regards Roger
... View more
04-25-2014
12:46 AM
Hi If you enter this command ad root, iptables will not run on next boot. chkconfig iptables off Note:This is only a workaround, if you want the security, the best is to modify the firewall rules to accept this traffic. Roger
... View more
03-11-2014
07:37 AM
Hi Shutting down iptables on the server worked for me. Thank you for sharing your solution! Regards Roger
... View more
Created by
Roger Saugestad
in Network Management
in Network Management
11-27-2013
11:01 AM
11-27-2013
11:01 AM
Hi Thank you for your comments and findings, but I don't thing we have the same root cause, as we already use E1000 adaptors in vmware and a later release where this bug in vmware should be fixed. Regards Roger
... View more
Created by
Roger Saugestad
in Network Management
in Network Management
09-10-2013
05:04 AM
09-10-2013
05:04 AM
Hi I'm having problems with upgrading software images on swithces when using tftp for image transfer. (SCP is not availiable in current image) The job reports as failed in "Jobs Dashboard" Validating device distribution context Distributing image c3560-ipservicesk9-mz.150-2.SE4.bin using protocol SCP Distributing image c3560-ipservicesk9-mz.150-2.SE4.bin using protocol TFTP SUCCESS FAILURE FAILURE ..and when looking into the logfile /opt/CSCOlumos/conf/ifm/swim/jobs/X.X.X.X_tftp_telnet.log it contains this output: HOSTNAME#copy t ftp://X.X.X.X/c3560-ipservicesk9-mz.150-2.SE4.bin flash:c3560-ipservicesk9-mz.150-2.SE4.bin Destination filename [c3560-ipservicesk9-mz.150-2.SE4.bin]? c3560-ipservicesk9-mz.150-2.SE4.bin Accessing t ftp://X.X.X.X/c3560-ipservicesk9-mz.150-2.SE4.bin ... Loading c3560-ipservicesk9-mz.150-2.SE4.bin from X.X.X.X (via VlanY): !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!... [timed out] %Error reading t ftp://X.X.X.X/c3560-ipservicesk9-mz.150-2.SE4.bin (Timed out) (I removed a bunch of "!" in the output ) I guess that the tftp server on the PI server shuts down or closes the connection after a period of time Is there a way to configure the tftp server settings on the Prime Infrastructure server or keep the tftp service always running? Running virtual appiance prime/admin# sh ver Cisco Application Deployment Engine OS Release: 2.0 ADE-OS Build Version: 2.0.6.003-px-build ADE-OS System Architecture: x86_64 Copyright (c) 2005-2010 by Cisco Systems, Inc. All rights reserved. Hostname: prime Version information of installed applications --------------------------------------------- Cisco Prime Infrastructure ------------------------------------------ Version : 2.0.0.0.294 Regards Roger Saugestad
... View more
- Tags:
- cisco_prime
- prime
- tftp
Labels:
Created by
Roger Saugestad
in Network Management
in Network Management
12-19-2012
02:35 AM
12-19-2012
02:35 AM
Hi From console you can enter: ncs password ftpuser admin password NEWPASSWORD Ragards Roger
... View more
11-25-2011
04:31 AM
Hi To apply some more information on this topic, I have collected remote-id samples on different ports. Results posted below. 000000000011111111112222222222333333 012345678901234567890123456789012345 Fa2/3 Remote-ID: 020023000200000a00030001c47d4f73a0bf Fa2/10 Remote-ID: 02002a000200000a00030001c47d4f73a0bf Fa2/11 Remote-ID: 02002b000200000a00030001c47d4f73a0bf Fa2/15 Remote-ID: 02002f000200000a00030001c47d4f73a0bf Fa2/16 Remote-ID: 020020080200000a00030001c47d4f73a0bf Fa2/17 Remote-ID: 020021080200000a00030001c47d4f73a0bf Fa2/18 Remote-ID: 020022080200000a00030001c47d4f73a0bf Fa2/31 Remote-ID: 02002f080200000a00030001c47d4f73a0bf Fa2/32 Remote-ID: 020028090200000a00030001c47d4f73a0bf Fa2/37 Remote-ID: 02002d090200000a00030001c47d4f73a0bf Fa2/39 Remote-ID: 02002f090200000a00030001c47d4f73a0bf Fa2/40 Remote-ID: 0200280a0200000a00030001c47d4f73a0bf Field 0 - 3: Vlan ID Field 4 - 4: Module Field 5 - 8: Interface Field 8 - 15: Unknown (to me) Field 16 -35: DUID If I isolate the part I think is related to interface number the list looks like this: Interface Module Port Fa2/3 2 3000 Fa2/10 2 a000 Fa2/11 2 b000 Fa2/15 2 f000 Fa2/16 2 0080 Fa2/17 2 1080 Fa2/18 2 2080 Fa2/31 2 f080 Fa2/32 2 8090 Fa2/37 2 d090 Fa2/39 2 f090 Fa2/40 2 80a0 I understand the numbering up to interface "15" == f. But from port 16 I lose track of the logics behind the numbering. Any help would be appreciated Regards Roger Saugestad
... View more
11-21-2011
02:55 AM
Hi I’m working on a lab for prefix delegation on cat 4500, sup7, cat4500e-universalk9.SPA.03.02.01.SG.150-2.SG1.bin. Prefix delegation works fine, but I’m having problems with decoding the remote-id option inserted by the 4500. The document “Implementing DHCP for IPv6” (located here: http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-dhcp.html#wp1054194 ) States “The remote-ID option provides information to the DHCPv6 server, including port information, the system's DUID, and the VLAN ID.” When capturing dhcp6 relay messages in the network I can find VLAN ID, mac address of the VLAN interface, but have trouble finding slot/port information fields in the message. The remote-id below is from a client attached to int vlan 512, and connected to fa2/37. Remote-ID: 02002d090200000a00030001c47d4f73a0bf HEX2DEC 512 VLAN ID of incomming DHCP packet on the 4500 HEX c47d4f73a0bf MAC address on int vlan 512 HEX2DEC 2 Slot 2 But I can't find the port information, my guess would be that it's located after slot info, but "0xD09" doesn't make sense to me. Has someone figured this out or know where to find documentation? Regards Roger Saugestad.
... View more
Labels:
09-22-2011
09:06 AM
Thank you for the information. I'll announce my request through the formal channels.
... View more
09-21-2011
01:41 AM
Hi Anybody who knows if/when “ipv6 vrf-lite” will be supported on Sup6E or Sup7 on cat4500? I can’t find any information about this on the web, and hope someone here knows the answer or can point me in the right direction. Regards Roger
... View more
Labels:
11-07-2014
HiHave you found a solution to this? I see the same isssue on WS-C4503-E
chassis and WS-X45-SUP8-E s...
04-25-2014
HiIf you enter this command ad root, iptables will not run on next
boot.chkconfig iptables off Note:...
03-11-2014
HiShutting down iptables on the server worked for me.Thank you for
sharing your solution! Regards Ro...
11-27-2013
HiThank you for your comments and findings, but I don't thing we have
the same root cause, as we alr...
09-10-2013
HiI'm having problems with upgrading software images on swithces when
using tftp for image transfer....
Created by
Roger Saugestad
in Network Management
12-19-2012
12-19-2012
HiFrom console you can enter:ncs password ftpuser admin password
NEWPASSWORDRagards Roger
11-25-2011
HiTo apply some more information on this topic, I have collected
remote-id samples on different port...
11-21-2011
HiI’m working on a lab for prefix delegation on cat 4500, sup7,
cat4500e-universalk9.SPA.03.02.01.SG...
Public Statistics
| Date Registered | 09-21-2011 01:29 AM |
| Date Last Visited | 01-08-2019 06:00 AM |
| Total Messages Posted | 11 |
