Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I have currently a problem with binding a static IP address to a mac address, my code is like below:router#show running-config Building configuration...Current configuration : 2998 bytes!version 12.4service timestamps debug datetime msecservice ti...
Hi Experts,I built the network like attached diagram, and hoping it to work like this:the traffic coming from outside, which is VLAN 1, will pass through ASA and go to VLAN 100 and 254.Routing protocol between R0, ASA and R1 is OSPF. The problem now...
I have a problem with DHCP ip assigning. I configured dhcp server on the router 2921 with 192.168.1.1/24 but the laptop is get invalid ip address of 169.254.x.x. The brand new laptop is running Windows 7 64bit. Here is a list what I tried:- ipconfig...
It's a non cisco 8 port switch without any configuration. I don't know the model because I am remote controlling the router helping the customer with trouble shooting. I guess there should be no problem with the setting of switch.
It's a non cisco 8 port switch without any configuration. I don't know the model because I am remote controlling the router helping the customer with trouble shooting. I guess there should be no problem with the setting of switch.
Yes, I have proved it will work after assigning a static IP to the PC. There will be 192.168.1.2 and a mac address on the output of show arp. If no static IP is set, this mac address won't be there.
