Issue with Dhcp binding static ip to a mac address
I have currently a problem with binding a static IP address to a mac address, my code is like below:
router#show running-config Building configuration...
Current configuration : 2998 bytes ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname router ! boot-start-marker boot-end-marker ! logging message-counter syslog enable secret 5
! no aaa new-model ! dot11 syslog ip source-route ! ! ip cef ip dhcp excluded-address 10.1.1.1 10.1.1.54 ip dhcp excluded-address 10.1.1.56 10.1.1.100 ! ip dhcp pool test host 10.1.1.55 255.255.255.0 hardware-address 0015.582d.9377 ieee802 default-router 10.1.1.1 dns-server 220.127.116.11 ! ip dhcp pool pool1 network 10.1.1.0 255.255.255.0 default-router 10.1.1.1 dns-server 18.104.22.168
interface FastEthernet0/1 no ip address ip virtual-reassembly duplex full speed 100 ! interface FastEthernet0/1.1 description data encapsulation dot1Q 1 native ip address 10.1.1.1 255.255.255.0 ip nat inside ip virtual-reassembly
interface FastEthernet0/1.2 description voice encapsulation dot1Q 2 ip address 10.1.2.1 255.255.255.0 ip nat inside ip virtual-reassembly ! ip forward-protocol nd ! no ip http server no ip http secure-server ! ip nat inside source list 1 interface FastEthernet0/0 overload access-list 1 permit 10.1.1.0 0.0.0.255 access-list 1 permit 10.1.2.0 0.0.0.255 snmp-server community public RO ! control-plane ! ! line con 0 exec-timeout 5 30 logging synchronous !
scheduler allocate 20000 1000 no process cpu extended no process cpu autoprofile hog end
However, after I rebooted my computer and the router, I still get a dhcp ip address which is not my desired one (10.1.1.55)..
Protocol Address Age (min) Hardware Addr Type Interface
Internet 10.1.1.1 - 2893.fe7a.4a71 ARPA FastEthernet0/1.1
Internet 10.1.1.215 6 0015.582d.9377 ARPA FastEthernet0/1.1
Please help to point out if I did something wrong... thanks in advance.
Listen: https://smarturl.it/CCRS9E24 Follow us: https://twitter.com/CiscoChampion
Cisco Radio Aware Routing addresses several of the challenges faced when merging IP routing and radio communications in mobile networks, especially those exhibiti...
Listen: https://smarturl.it/CCRS9E23 Follow us: https://twitter.com/CiscoChampion The Wi-Fi 6E Catalyst 9136 access point takes advantage of the 6-GHz band to produce a network that is more reliable and secure, with higher throughput, more ...
When moving from OSPFv2 to OSPFv3, there are many changes in the format of the LSAs Type, but the most known changes are: IP prefix informations are no longer carried in Type-1 LSA and Type-2 LSA, new LSAs Type 8 and 9 are added to carry these prefixes.
Read a preview of my book OSPF The ultimate for CCIE Enterprise and Infrastructure exam in Books Google Doc.
Read a preview of my book OSPF The ultimate for CCIE Enterprise and Infrastructure exam in Books Google Doc #CCIE #Cisco #exam #Enterprise ...
Question 1: What are the OSPF Loop Prevention Mechanisms
In single area, the routers have the Link State Database, having the same LSDB helps the routers to build a loop-free topology.
Now in a multiarea topology, the ABRs are respon...