We have a pair of ASA 5545-X firewalls as our Prod ASA. The prod ASA has a global ACL and an ACL for EIGRP advertisements. In addition to that we have a VPN Filter ACL and an interesting traffic matching ACL. It seems the ASA matches the global ACL f...
If I have a pair of ASA 5585-X with SSP 20 in HA (Active/Active), with 9.X code:1. My understanding is the licenses (VPN, SSL, enable 10G i/o) are not shared and we'll need 2 license counts for the HA cluster.2. Does L2L IPSec VPN failover b...
So I've been reading Data Center Access Design with Cisco Nexus 5000 Series Switches and 2000 Series Fabric Extenders and Virtual PortChannels and came across a table that says dual homing FEXs to 5Ks is not supported when 2 5Ks and 2 7Ks are in a du...
I have a pair of Cisco Nexus 7009 with 2 F2-series 48 port 10gbe modules each. I also have 14 NX 2248 FEXs. I intend to dual home each FEX to each 7K. Can I do that with enhanced vPC? Does NX7K support vPC+?
Is IP SLB possible on a Cisco NX 7K running NX-OS 6.X? Or do I need an ACE?I know IP SLB can be configured with server farms and virtual server IPs etc on Cisco IOS, but I am not sure if a similar feature/license is available on NX-OS 6.X on a 7K.Ple...
Thanks. How do I get around this?
{"totalCount":"1","imdata":[{"error":{"attributes":{"code":"403","text":"Token was invalid (Error: Token timeout)"}}}]}
This is right after I post for an APIC login and get a successful login (Status 200 OK)
Thank ...
Thank you Karsten and Dinesh. I am using a VPN filter and have that applied to my group-policy too. I am not sure how to work around the global ACL. I also noticed I need to move my nat statements below the object NATs.
I'm seeing a similar problem on our Nexus 7710s. How did you fix your issue with the mac tables?2014 Oct 29 13:03:36 endr %L2MCAST-SLOT2-2-L2MCAST_MAC_FULL_LC: Failed to insert entry in MAC table for FE 11 swidx 1 (0x1) with err (mac table full). To ...
We are seeing the same problem on our 4510 running Sup 7-E with 03.05.00. We downgraded to 03.04.03 but still see the same issue.The command 'show platform cpu packet drivers' shows the count stop at 2512 on queue 2. Does not increment after that.
.jpg "Hall of Fame Community Legend"){kind=icon}
