Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
- Cisco Community
- :
- About Jose Alejandro Rodriguez Rodriguez
08-18-2017
Jose Alejandro Rodriguez Rodriguez
Member since
05-09-2012
Beginner
Created by
Jose Alejandro Rodriguez Rodriguez
in IP Telephony and Phones
in IP Telephony and Phones
08-14-2015
08:35 AM
08-14-2015
08:35 AM
I'm testing the app imagicle which contains CDR capabilites I'm trying to set de FTP path for the cdr records but it contains spaces: The FTP path is :C:\Program Files (x86)\StonevoiceAS\Apps\BillyBlues\Engine\ccm_express\1 When I try to configure it in CUCME i get error because of the spaces in the path: UC-SK(config-gw-accounting-file)#$50.93:21/C:Program Files (x86)\StonevoiceAS\Apps\BillyBlues\Engine\ccm_express\1 username danny password 7 06545B711D1C5D59 primary ftp 192.168.50.93:21/C:Program Files (x86)\StonevoiceAS\Apps\BillyBlues\Engine\ccm_express\1 username danny password 7 06545B711D1C5D59 ^ % Invalid input detected at '^' marker. Is there any workaround on this? Thanks in advance Regards Alejandro
... View more
Labels:
Created by
Jose Alejandro Rodriguez Rodriguez
in Routing
in Routing
03-11-2015
04:07 PM
03-11-2015
04:07 PM
Thanks I ll give it a try
... View more
Created by
Jose Alejandro Rodriguez Rodriguez
in Routing
in Routing
03-11-2015
01:10 PM
03-11-2015
01:10 PM
Hello Community Team, I have an error in this card. The show platform issues the following error: ASR-1004-IBM#show platform Chassis type: ASR1004 Slot Type State Insert time (ago) --------- ------------------- --------------------- ----------------- 0 ASR1000-SIP10 ok 28w1d 0/0 SPA-8XCHT1/E1-V2 out of service 00:15:41 0/1 SPA-2X1GE-V2 ok 28w1d 0/2 SPA-2X1GE-V2 ok 28w1d R0 ASR1000-RP2 ok, active 28w1d F0 ASR1000-ESP10 ok, active 28w1d P0 ASR1004-PWR-AC ok 28w1d P1 ASR1004-PWR-AC ok 28w1d Slot CPLD Version Firmware Version --------- ------------------- --------------------------------------- 0 09111601 12.2(33r)XNC R0 13092401 15.2(1r)S F0 09111601 12.2(33r)XNC The Logging output 006944: Mar 11 14:52:42.285: %SPA_OIR-6-OFFLINECARD: SPA (SPA-8XCHT1/E1-V2) offline in subslot 0/0 006945: Mar 11 14:54:42.340: %SPA_PLUGIN-3-RETRY_EXHAUSTED: SIP0/0: SPA-8XCHT1/E1-V2[0/0]: plugin initialization failed(retries exhausted). host_status(0x00000001), spa_status(0x00000907) 006946: Mar 11 14:54:47.344: %SPA_OIR-3-RECOVERY_RELOAD: subslot 0/0: Attempting recovery by reloading SPA 006947: Mar 11 14:54:47.344: %SPA_OIR-6-OFFLINECARD: SPA (SPA-8XCHT1/E1-V2) offline in subslot 0/0 006948: Mar 11 14:55:13.702: %IOSXE-3-PLATFORM: F0: cpp_cp: QFP:0.0 Thread:003 TS:00017037644160891833 %IPSEC-3-REPLAY_ERROR: IPSec SA receives anti-replay error, DP Handle 187, src_addr 10.70.0.86, dest_addr 10.70.0.66, SPI 0x1c1b39f4 006949: Mar 11 14:56:47.416: %SPA_PLUGIN-3-RETRY_EXHAUSTED: SIP0/0: SPA-8XCHT1/E1-V2[0/0]: plugin initialization failed(retries exhausted). host_status(0x00000001), spa_status(0x00000907) 006950: Mar 11 14:56:52.420: %SPA_OIR-3-RECOVERY_RELOAD: subslot 0/0: Attempting recovery by reloading SPA 006951: Mar 11 14:56:52.421: %SPA_OIR-6-OFFLINECARD: SPA (SPA-8XCHT1/E1-V2) offline in subslot 0/0 006952: Mar 11 14:58:52.494: %SPA_PLUGIN-3-RETRY_EXHAUSTED: SIP0/0: SPA-8XCHT1/E1-V2[0/0]: plugin initialization failed(retries exhausted). host_status(0x00000001), spa_status(0x00000907) 006953: Mar 11 14:58:57.498: %SPA_OIR-3-RECOVERY_RELOAD: subslot 0/0: Attempting recovery by reloading SPA 006954: Mar 11 14:58:57.498: %SPA_OIR-6-OFFLINECARD: SPA (SPA-8XCHT1/E1-V2) offline in subslot 0/0 006957: Mar 11 15:00:57.593: %SPA_OIR-3-SPA_POWERED_OFF: subslot 0/0: SPA 8xCHT1/E1-V2 SPA powered off after 5 failures within 1200 seconds 006958: Mar 11 15:00:57.594: %SPA_OIR-6-OFFLINECARD: SPA (SPA-8XCHT1/E1-V2) offline in subslot 0/0 006959: Mar 11 15:00:57.589: %SPA_PLUGIN-3-RETRY_EXHAUSTED: SIP0/0: SPA-8XCHT1/E1-V2[0/0]: plugin initialization failed(retries exhausted). host_status(0x00000001), spa_status(0x00000907) Any ideas. Thanks in advance José Alejandro Rodríguez R
... View more
- Tags:
- #asr #E1 #T1 #ERROR
Labels:
Created by
Jose Alejandro Rodriguez Rodriguez
in Firewalls
in Firewalls
02-11-2015
02:57 PM
02-11-2015
02:57 PM
CORE-UBV-01#show module Mod Ports Card Type Model Serial No. --- ----- -------------------------------------- ------------------ ----------- 1 48 48 port 10/100/1000 IEEE 802.3AT WS-X6148E-GE-45AT SAL1644RDQF 2 48 CEF720 48 port 1000mb SFP WS-X6748-SFP SAL1642QGQJ 3 6 Firewall Module WS-SVC-FWM-1 SAL1628GQJ9 5 2 Supervisor Engine 720 (Active) WS-SUP720-3B SAL1642QK0A Mod MAC addresses Hw Fw Sw Status --- ---------------------------------- ------ ------------ ------------ ------- 1 e4d3.f1cb.5070 to e4d3.f1cb.509f 1.3 8.4(1) 12.2(33)SXJ1 Ok 2 30f7.0d04.90a4 to 30f7.0d04.90d3 2.4 12.2(18r)S1 12.2(33)SXJ1 Ok 3 f0f7.5568.b788 to f0f7.5568.b78f 4.5 7.2(1) 20.1(2)SXJ PwrDown 5 ccef.4838.53c2 to ccef.4838.53c5 5.13 8.5(4) 12.2(33)SXJ1 Ok Mod Sub-Module Model Serial Hw Status ---- --------------------------- ------------------ ----------- ------- ------- 1 IEEE 802.3at PoE+ Daughter WS-F6K-48-AT SAL1644RFZ0 1.0 Ok 2 Centralized Forwarding Card WS-F6700-CFC SAL1642QGUW 4.1 Ok 5 Policy Feature Card 3 WS-F6K-PFC3B SAL1643QMLG 2.6 Ok 5 MSFC3 Daughterboard WS-SUP720 SAL1642QHXZ 5.1 Ok Mod Online Diag Status ---- ------------------- 1 Pass 2 Pass 3 Not Applicable 5 Pass CORE-UBV-01#HW-module MOdule 3 RESET Proceed with reload of module?[confirm] % module 3 is operationally off (Module Failed SCP dnld) CORE-UBV-01# I have a problema with my integrated FW of my 6500. I restarted the 6500 but nothings happens. Any output would be greatly appreciated.
... View more
Labels:
Created by
Jose Alejandro Rodriguez Rodriguez
in Routing
in Routing
12-22-2014
02:15 PM
12-22-2014
02:15 PM
Hello, We did today a video test between our Router and a ASR 1004 to watch surveillance cameras. The TX in the router incemented which is normal but after we did the test the RX incremented as well. We are using DMVPN between the routers (branchs and the ASR). SrcIf SrcIPaddress DstIf DstIPaddress Pr SrcP DstP Bytes Gi0/0.729 10.70.0.1 Gi0/1.4 10.70.0.25 32 2BBF D640 119M Local 10.70.0.25 Gi0/0.729* 10.70.0.1 32 9FC4 267A 10M Gi0/0.729 10.70.0.1 Gi0/1.4 10.70.0.25 32 2BBF D640 7338K Gi0/0.729 10.70.0.1 Gi0/1.2 10.70.0.25 32 2BBF D640 6809K Local 10.70.0.25 Gi0/0.729* 10.70.0.1 32 9FC4 267A 1479K Local 10.70.0.25 Gi0/0.729* 10.70.0.1 32 9FC4 267A 1446K Tu0 10.0.0.138 Gi0/1.4* 10.52.23.107 06 01BD 0966 329K Gi0/0.729 10.70.0.1 Local 10.70.0.25 32 2BBF D640 111K Gi0/1.4 10.52.23.117 Tu0 10.0.30.22 06 0445 01BB 105K Gi0/1.4 10.52.23.117 Tu0 10.0.30.22 06 0440 01BB 70K Tu0 10.0.30.22 Gi0/1.4* 10.52.23.117 06 01BB 0445 63K Tu0 10.0.30.22 Gi0/1.4* 10.52.23.117 06 01BB 0440 31K Tu0 10.0.200.13 Gi0/1.4* 10.52.23.102 06 0050 0658 30K Gi0/1.4 10.52.23.107 Tu0 10.0.0.138 06 0966 01BD 21K Vi3 10.1.2.133 Null 224.0.0.10 58 0000 0000 11K Tu0 10.0.200.13 Gi0/1.4* 10.52.23.111 06 0050 0DB7 4893 Tu0 10.0.200.13 Gi0/1.4* 10.52.23.105 06 0050 0CD2 4783 Gi0/1.4 10.52.23.102 Tu0 10.0.200.13 06 0656 0050 2959 Tu0 10.0.200.13 Gi0/1.4* 10.52.23.111 06 0050 0DB7 1917 Tu0 10.0.108.138 Gi0/1.4* 10.52.23.107 06 C007 0961 904 20 of 20 top talkers shown. 61 flows processed. The IP addresses in black belong to the IPs of the interfaces 10.70.0.1 (ASR) and 10.70.0.25 (Local Router) Any thought or ideas why the traffic in RX side is so high indicating protocol 32. Any inputs will be appreciated. Regards Jose Rodriguez
... View more
Labels:
12-04-2013
01:43 PM
Thanks man, After some hours of searching and feeling angry that there are more cheaper servers in linux that can do this i recognize you're correct. Thanks for your help. Regards
... View more
12-04-2013
12:03 PM
Hello Julio, I did it men using the followings script regex domainlist16 "\.sharing-file\.com" regex domainlist17 "\.keepandshare\.com" regex domainlist18 "\.kazaa\.com" regex domainlist19 "\.zeropaid\.com" regex domainlist20 "\.daniweb\.com" regex domainlist21 "\.megashare\.com" regex domainlist22 "\.ahlyegypt\.com" regex domainlist23 "\.ultrareach\.net" regex domainlist24 "\.wujie\.net" regex domainlist25 "\.tv2free\.com" regex domainlist26 "\.sharereactor\.com" regex domainlist27 "\.youporn\.com" class-map type regex match-any DomainBlockList match regex domainlist1 match regex domainlist2 match regex domainlist3 match regex domainlist4 match regex domainlist5 match regex domainlist6 match regex domainlist7 match regex domainlist8 match regex domainlist9 match regex domainlist10 match regex domainlist11 match regex domainlist12 match regex domainlist13 match regex domainlist14 match regex domainlist15 match regex domainlist16 match regex domainlist17 match regex domainlist18 match regex domainlist19 match regex domainlist20 match regex domainlist21 match regex domainlist22 match regex domainlist23 match regex domainlist24 match regex domainlist25 match regex domainlist26 match regex domainlist27 class-map type inspect http match-all BlockDomainsClass match request header host regex class DomainBlockList ###################################################################################################################### access-list inside_mpc extended permit tcp any any eq www access-list inside_mpc extended permit tcp any any eq 8080 class-map httptraffic match access-list inside_mpc ###################################################################################################################33 policy-map type inspect http http_inspection_policy parameters protocol-violation action drop-connection class BlockDomainsClass reset log policy-map inside-policy class httptraffic inspect http http_inspection_policy ############################################################################################################################# service-policy inside-policy interface inside The main proble that i had is that the client can still visit facebook using https:facebook.com if i add in the acl access-list inside_mpc extended permit tcp any any eq 443 All my https traffic goes down
... View more
12-04-2013
08:35 AM
I'M TRYING TO FILTER IN MY FWSM URLS I have some problems because all my https traffic is being discarded. The configuractions below: class-map inside1-class match port tcp eq https ! ! policy-map type inspect http URL description URL parameters protocol-violation action drop-connection match request uri regex FACEBOOK drop-connection log match request uri regex YOUTUBE drop-connection log policy-map inside1-policy class inside1-class inspect http URL ! service-policy inside1-policy interface inside1 Any good indications will be appreciated
... View more
- Tags:
- fwsm
- url
- url_filter
Labels:
Created by
Jose Alejandro Rodriguez Rodriguez
in Cisco Cafe
in Cisco Cafe
11-04-2013
09:07 PM
11-04-2013
09:07 PM
WHAT IS THE MOST USEFUL FOR THE FUTURE? WHAT IS THE MOST USEFUL IF I WANT TO WORK ABROAD? ANY INPUT WILL BE REALLY APRECIATED!!
... View more
Labels:
Created by
Jose Alejandro Rodriguez Rodriguez
in Other Network Architecture Subjects
in Other Network Architecture Subjects
10-28-2013
09:17 AM
10-28-2013
09:17 AM
Thanks Marvin, I have a case with a customer who has in its rack a 6500 in the top of the rack and servers below. In terms of weigh i'm aware that the 6500 could damage the servers if for any reasons it falls. I want to make a recommendation to this customer and i want to make this based on data sheet and standards.
... View more
Created by
Jose Alejandro Rodriguez Rodriguez
in Other Network Architecture Subjects
in Other Network Architecture Subjects
10-28-2013
08:20 AM
10-28-2013
08:20 AM
Is there a guide that recommends the optimum order to rack servers and routers? Can you please recommend me a guid or book where i can make recommendations based on server's weight, deep, space,etc? Thanks you in advance, Alejandro
... View more
Labels:
Created by
Jose Alejandro Rodriguez Rodriguez
in Switching
in Switching
10-15-2013
07:25 AM
10-15-2013
07:25 AM
I have trouble to install a Frame Relay service because the vendor sold me WIC cards but i think 2921 only supports HWIC cards Here's the output of the show diag: Router Llano Mall ag321-acc-rou-01#sh diag | b WIC Slot 1: WIC Slot 1: Serial 2T (12in1) WIC module not supported/disabled in this slot Hardware revision 1.0 Board revision B0 Serial number 32098957 Part number 800-03181-02 FRU Part Number WIC-2T= Test history 0x0 RMA number 00-00-00 Connector type PCI EEPROM format version 1 EEPROM contents (hex): 0x20: 01 12 01 00 01 E9 CA 8D 50 0C 6D 02 00 00 00 00 0x30: 58 00 00 00 04 04 08 00 FF FF FF FF FF FF FF FF Router Cumaná ag521-acc-rou-01#sh diag | b WIC Slot 0: WIC Slot 0: HWIC Serial 2T WAN daughter card Hardware Revision : 2.0 Top Assy. Part Number : 800-34379-01 Board Revision : A0 Deviation Number : 115024 Fab Version : 02 PCB Serial Number : FOC15023T8C RMA Test History : 00 RMA Number : 0-0-0-0 RMA History : 00 Fab Part Number : 28-8141-01 Product (FRU) Number : HWIC-2T Version Identifier : V03 CLEI Code : COUIA1RCAB EEPROM format version 4 EEPROM contents (hex): 0x00: 04 FF 40 05 89 41 02 00 C0 46 03 20 00 86 4B 01 0x10: 42 41 30 88 00 01 C1 50 02 02 C1 8B 46 4F 43 31 0x20: 35 30 32 33 54 38 43 03 00 81 00 00 00 00 04 00 0x30: 85 1C 1F CD 01 CB 87 48 57 49 43 2D 32 54 89 56 0x40: 30 33 20 D9 02 40 C1 C6 8A 43 4F 55 49 41 31 52 0x50: 43 41 42 FF FF FF FF FF FF FF FF FF FF FF FF FF 0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF Is there any command or any form that i can use this card to implement frame relay? Thanks in advance Alejandro
... View more
Labels:
Created by
Jose Alejandro Rodriguez Rodriguez
in Firewalls
in Firewalls
10-09-2013
11:17 AM
10-09-2013
11:17 AM
Yes, Thank you all. I guess I should figure it out and see how can i test PAT without using icmp
... View more
Created by
Jose Alejandro Rodriguez Rodriguez
in Firewalls
in Firewalls
10-09-2013
10:05 AM
10-09-2013
10:05 AM
Hmm so its not possible to ping form inside iface to ouside iface after all? I have issued a sh iface and see a lot of packed dropped Interface Vlan500 "inside", is up, line protocol is up Hardware is EtherSVI, BW Unknown Speed-Capability, DLY 10 usec Description: Interfaz Interna MAC address d867.d992.5400, MTU 1500 IP address 192.168.1.1, subnet mask 255.255.255.0 Traffic Statistics for "inside": 0 packets input, 0 bytes 1 packets output, 68 bytes 4696 packets dropped Interface Vlan500 "inside", is up, line protocol is up Hardware is EtherSVI, BW Unknown Speed-Capability, DLY 10 usec Description: Interfaz Interna MAC address d867.d992.5400, MTU 1500 IP address 192.168.1.1, subnet mask 255.255.255.0 Traffic Statistics for "inside": 0 packets input, 0 bytes 1 packets output, 68 bytes 4696 packets dropped Even when i have explicitely set an ACL for permit all traffic ...
... View more
Created by
Jose Alejandro Rodriguez Rodriguez
in Firewalls
in Firewalls
10-09-2013
09:39 AM
10-09-2013
09:39 AM
JouniForss "Notice though that a host behind "inside" wont be able to ICMP to the "outside" interface IP address and host behind "outside" wont be able to ICMP the "inside" interface. This is normal behaviour" This is precisely what i wanna do but instead of using a host of the inside interface i want to use the svi inside in the FWSM as source of ping, this is because i'm trying to see if PAT works being able to ping to Internet hosts from the inside interface" But i'm not able even to ping my own interfaces.....
... View more
Latest Contributions by Jose Alejandro Rodriguez Rodriguez
- Latest Contributions by Jose Alejandro Rodriguez Rodriguez
- Discussions Jose Alejandro Rodriguez Rodriguez has Participated In
- TKBs Jose Alejandro Rodriguez Rodriguez has Participated In
- Blogs Jose Alejandro Rodriguez Rodriguez has Participated In
- Events Jose Alejandro Rodriguez Rodriguez has Participated In
- Videos Jose Alejandro Rodriguez Rodriguez has Participated In
Created by
Jose Alejandro Rodriguez Rodriguez
in IP Telephony and Phones
08-14-2015 08:35 AM
08-14-2015 08:35 AM
I'm testing the app imagicle which contains CDR capabilites I'm trying
to set de FTP path for the cd...
Created by
Jose Alejandro Rodriguez Rodriguez
in Routing
03-11-2015 04:07 PM
03-11-2015 04:07 PM
Thanks I ll give it a try
03-11-2015 01:10 PM
Hello Community Team, I have an error in this card.The show platform
issues the following error: ASR...
Created by
Jose Alejandro Rodriguez Rodriguez
in Firewalls
02-11-2015 02:57 PM
02-11-2015 02:57 PM
CORE-UBV-01#show moduleMod Ports Card Type Model Serial No.--- -----
-------------------------------...
Created by
Jose Alejandro Rodriguez Rodriguez
in Routing
12-22-2014 02:15 PM
12-22-2014 02:15 PM
Hello, We did today a video test between our Router and a ASR 1004 to
watch surveillance cameras.The...
12-04-2013 01:43 PM
Thanks man,After some hours of searching and feeling angry that there
are more cheaper servers in li...
12-04-2013 12:03 PM
Hello Julio,I did it menusing the followings scriptregex domainlist16
"\.sharing-file\.com"regex dom...
12-04-2013 08:35 AM
I'M TRYING TO FILTER IN MY FWSM URLSI have some problems because all my
https traffic is being disca...
Created by
Jose Alejandro Rodriguez Rodriguez
in Cisco Cafe
11-04-2013 09:07 PM
11-04-2013 09:07 PM
WHAT IS THE MOST USEFUL FOR THE FUTURE?WHAT IS THE MOST USEFUL IF I WANT
TO WORK ABROAD?ANY INPUT WI...
Created by
Jose Alejandro Rodriguez Rodriguez
in Other Network Architecture Subjects
10-28-2013 09:17 AM
10-28-2013 09:17 AM
Thanks Marvin,I have a case with a customer who has in its rack a 6500
in the top of the rack and se...
10-28-2013 08:20 AM
Is there a guide that recommends the optimum order to rack servers and
routers?Can you please recomm...
Created by
Jose Alejandro Rodriguez Rodriguez
in Switching
10-15-2013 07:25 AM
10-15-2013 07:25 AM
I have trouble to install a Frame Relay service because the vendor sold
me WIC cards but i think 292...
Created by
Jose Alejandro Rodriguez Rodriguez
in Firewalls
10-09-2013 11:17 AM
10-09-2013 11:17 AM
Yes,Thank you all. I guess I should figure it out and see how can i test
PAT without using icmp
Created by
Jose Alejandro Rodriguez Rodriguez
in Firewalls
10-09-2013 10:05 AM
10-09-2013 10:05 AM
Hmm so its not possible to ping form inside iface to ouside iface after
all?I have issued a sh iface...
Created by
Jose Alejandro Rodriguez Rodriguez
in Firewalls
10-09-2013 09:39 AM
10-09-2013 09:39 AM
JouniForss"Notice though that a host behind "inside" wont be able to
ICMP to the "outside" interface...
Public Statistics
| Date Registered | 05-09-2012 10:00 PM |
| Date Last Visited | 08-18-2017 04:27 AM |
| Total Messages Posted | 39 |
Helpful Votes Given To
.jpg "Hall of Fame Master"){kind=icon}
