Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi everyone,
I tried to resolve ths issue that I have with my CME 10.5 running on my Cisco 2911 with Version 15.4(3)M3
I'm using SIP Phones 7821 on it.
I'm already follow this LPCOR Configuration Example and when I apllied this configuration to my...
Hi, I'm trying to install an addittional license to my vlwc, while I try to install the license from my TFTP, the transfer just stucked, mean while on my TFTP Server logs, the process has been started. I try with Solarwinds TFTP Server and TFTP32 an...
Hi I'm wondering how to transfer my UC Licensefrom my defective Router 2911 to my new remplacement unit (RMA). I know about the normal process when you have on list the device license on you CCO, but in this case, this device is not available on any...
I'm running CMExpress on Cisco 2911 with one E1 card and callers can't hear ringback when the call is actually ringing in the local site. They just hear one ringback on the establish of call and after that, nothing until the end-user off-hook the pho...
How can i upgrade the AIR-LAP IOS Version from 12.4(21a)JA to 15.2(2)JB to try joinning to my vWLC Release 7.4.100This AIR-LAP has never been joinned to any controller, and i have access to CLI Console.I try typing archive and upgrade commands but ar...
I resolve this issue through a Cisco Support Engineer who help to resend me the License File and this new License File didn't had any issue to install it.
Thanks in advanced for your help.
Regards,
Gustavo.
Thanks sobhardw, I tried both options GUI and CLI options, but the operation is still marked as Failed... operation timeout... The Log of my TFTP server, indicates the file was copy and the transfer was completed succesfully. I will aprreciate any t...
Sorry Scott to reply until today. I did a copy successfully the configuration file to TFTP Server and apparently the License File is transfered correctly to the vWLC but when is there just don't install the LIC file then the installation is marked as...
