Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all, We've recently upgraded to 7.4.121.0 from 7.3.101.0 and I've noticed that P2P drop action is no longer functioning. I am able to see and connect to all clients connected to the same SSID. I'm using netcat to open raw sockets. I searched for b...
Hi all, We just ran in to an issue with a particular building unable to restore wireless connectivity because our APs could not receive DHCP addresses. We had an outage over the weekend that caused our APs to disassociate from the controller. When th...
You should be able to SSH into the AP and view the logs to get a better idea of why is isn't joining. The WLC should have some logs as well. You said you ran some debugs - what are they saying?
You can optionally send a syslog destination address in your DHCP options. This message is simply stating that the AP did not receive that option in its DHCP transaction. If it doesn't receive a syslog address, it will default to 255.255.255.255. If ...
Hi Adnan, The applications you listed utilize the Bonjour which is a link-local multicast service discovery protocol. Generally speaking, if your devices are on the same subnet, it should work with default settings, but you might have to tweak some s...
FYI: The D-Link DWA-171 is a single-stream 802.11ac adapter. Maximum data rate is 433.3 using 80MHz channel bandwidth and short guard interval. You'll need an adapter capable of 2 spatial streams for 867 datarate.
