Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,We upgraded our ISE from 2.1 to 2.2 yesterday. Up until the upgrade sending guest credentials using the SMS HTTP API worked fine. After the upgrade it no longer works. There is nothing wrong with the http-string as it works when I try from my brow...
Hi,
I am working on getting our ISE device administration working and have hit a snag.
I am trying to only let users of certain Active Directory groups authenticate. I have configured Authorization policies with AD-groups and it works fine. It's the ...
I'm having problems with the 12.2(55)SE7 software when using Tacacs. It seems the CPU load is so high I am not able to log on to the switch. When I change the config, via SNMP, to use local userdatabase I can log on, but the CPU load is still very hi...
Hi everyone,I'm trying to build a config file for factory default switches to pull from a TFTP server. The switches are at remote locations with a managed wan-connection where we have no control over the directly connected router. The config files wo...
We are about to a large amount of access points from access ports to trunks. Is there a report function in NCS that will give me a list of the APs and their CDP neighbor? I am able to view the information under "monitor/devices/access points" but I c...
The directory for the TFTP server is /tftpboot/*NOTE* This is not the directory LMS use when deploying software - only when you use LMS as a TFTP server - eg copy tftp flash on switches.
Thx for the info!I wanted to filter out interface up/down messages sent to our Cisco Prime syslog and used the following commands to make it happen.logging discriminator linkud mnemonics drops UPDOWNlogging host "IP of syslogserver" discriminator lin...
Routers use layer 3 addressing to make routing decisions. VLAN ID is a layer 2 tag. When the ethernet frame arrives at your router interface with a VLAN tag the tag is stripped away before it is sent to the actual routing engine.You don't have to hav...
