Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Because Prime or LMS has no ability to backup FWSM and ASASM configurations, here I share our trick to do "backups" from a remote linux server.FAckup.sh stands for FWSM-and-ASASM-backup It uses ASDM stuffs to get configs.Configuration file looks li...
Hi guys,I am using 3548 to connect to partners.I use a VRF, with static routes, and my VRF can ping hosts behind the next hop. Perfect.In my VRF, I can get routes from the default VRF :[...]vrf context myPartner address-family ipv4 unicast import...
Hi,I need to load balance my trafic across two unequal cost multipath (2Mbs and 4 Mbs). We have four routers(2600 and 3600) wich interconnect our sites and two unequal bandwidth lines (2Mbs and 4 Mbs). I would like to share trafic in 1/3 and 2/3 prop...
Well, after having many discussions about this, it seems that we are a little bit to early on that technology.We are using a 3548/3548/3048 trio for building simple low latency multicast delivery platform, and using fresh out of the oven NX-OS 6 with...
We are progressing.Supposing we forget the "default" VRF.Loopback (lo10, 100.100.100.1/24) <=> VRF prod <=> VRF partner <=> fiber <=> partner <=> target hostIf we create a production vrf and a partner vrf, and we import/export routes from bgp inter-v...
