About InayathUlla Sharieff

InayathUlla Sharieff · 11-23-2016

Hi All, I would like to update when you have quad sup running in the VSS chasis then the In-Chasis standby will be in RPR mode which is expected result hence dont get confuse and troubleshoot when you dont see the module in Hot Standby state. Please ...

InayathUlla Sharieff · 09-15-2015

Hi All,sometime you might happen to see the issue that the telnet/ssh to the box is not happening from remote.But console works.Hardware;WS-C6509-Elogging to the box through console and checking the logs it reports the following error:-Sep 16 03:00:2...

InayathUlla Sharieff · 09-14-2015

Hi All,Sometime you might see the following error on the 6500 chasis with Sup :- WS-SUP32-GE-3B= while copying the image from Ftp/active sup/disk0 to standby bootflash. show moduleMod Ports Card Type Model Se...

InayathUlla Sharieff · 08-27-2015

Hi All,Please find the details of the error message if you happen to see it on 4500 series devices. Error:- %C4K_SUPERVISOR-2-FPGASOFTERROR: Memory inconsistency detected% C4K_SUPERVISOR-2-SOFTERROR: memory inconsistency detected Explanation:- This ...

InayathUlla Sharieff · 11-20-2014

IntroductionConfiguring OTV on F3 cardQuestionI am facing issue with reference configuring OTV on F3-Card (N77-F348XP-23) only VDC getting following message.Nexus77K(Config)#feature otv Feature otv not supported in F2E without M1, M1XL or M2XL VDCS...

InayathUlla Sharieff · 02-23-2021

Hi Carlo, Simple is that the IOS would failed. Now coming to yur original question how you can verify there is no way that you can verify when using packages.conf. NOTE:- Checksum of packages.conf is not going to match with the one on cisco.com as i...

InayathUlla Sharieff · 02-23-2021

Hi Carlo, The checksum will be generated for all files in flash, however to verify if it is the correct one, it can only be matched with checksum of .bin file and the one available on cisco.com. NOTE:- Checksum of packages.conf is not going to matc...

InayathUlla Sharieff · 01-31-2019

Congratulation Peter.You deserve every bit of it.

InayathUlla Sharieff · 07-17-2017

Hi Murari, Please login to the Cisco software download page and select the product and firmware you would like to upgrade to and then download the same from the site. Once you are download upload it to the Switch/router via tftp or usb. then change ...

InayathUlla Sharieff · 07-17-2017

http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/nx-os/virtual_device_context/configuration/guide/b-7k-Cisco-Nexus-7000-Series-NX-OS-Virtual-Device-Context-Configuration-Guide/creating-vdc.html#task_922595027D034329B7F38566AF46ACB2

Member Since	‎11-21-2012 06:56 PM
Date Last Visited	‎12-13-2023 12:23 AM
Posts	2,700
Total Helpful Votes Received	4055

User Statistics

User Activity

VSS Quad-Sup on 4500 ( Sup remains in RPR mode).

SSH/Telnet not happening to Catalyst 6K due to SSH RSA_Sign:Private key not found.

copying image on the Standby Sup issue sometimes seen < Unknown error 0>

%C4K_SUPERVISOR-2-SOFTERROR / %C4K_SUPERVISOR-2-FPGASOFTERROR

Error: Feature OTV not supported - "OTV issue on F3 Card"

Re: How to know which specific IOS Image (.bin) file has been uploaded to the Flash

Re: How to know which specific IOS Image (.bin) file has been uploaded to the Flash

Re: Congratulations Peter Paluch: Our Newest Hall of Fame Member

Hi Murari,

http://www.cisco.com/c/en/us