Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
IntroductionCisco UCS Central manages multiple Cisco UCS instances (or domains) across globally distributed data centers. Every instance of Cisco UCS Manager and all of the components managed by it form a domain. Cisco UCS Central integrates with Cis...
All,UCSPE based on UCSM 2.1 has been released and is available for download http://developer.cisco.com/web/unifiedcomputing/ucsemulatordownload New Features in this release are as below.Release 2.1(1aPE1) adds support for the following: •Cluster su...
IntroductionCIMCChanging to iSCSIReference IntroductionUCS C-series 220 M3 and 240 M3 rack servers have embedded Intel i350 LOMs and support PCI-E based Intel i350 NICs that are capable of iSCSI boot functionality. However, the problem is option ...
Hello All, I need suggestions on achieving load balancing traffic( T1 links) with the following network setup Inside N/W-->ASA-->3560 Switch----> 2800 router -- T1 Link (layer 2) | |--> 2800 router--...
Hello The following metrics are displayed under each interface. MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,reliability 255/255, txload 1/255, rxload 1/255 1. what is the significance of these values on switchports and vlan interface (except MTU, BW...
Hello,right syntax to boot FI from image under bootflash ( unless if you have another image file under bootflash:/installables/switch ) boot ucs-6100-k9-kickstart.5.0.3.N2.2.1s.bin ucs-6100-k9-system.5.0.3.N2.2.1s.binThanks
Hello,You might be already aware of it but sharing it here. UCS powertool or UCS python SDK does not fit your needs ?you can explore the UCSM MIT via visore -- http://<ucsm-ip-address>/visore.html Thanks
Other things to consider
1) since you have dis-join L2 ( uplink port-channel with different set of VLANs ) , make sure the vNICs are configured with right set of VLANs allowed in the port-channel
2) OS installed in the blade ? does it have enic dri...
Hello Gary,I hope you would have reviewed your environment ( OS / HW / drivers ) against Compatibility https://www.cisco.com/c/en/us/support/servers-unified-computing/unified-computing-system/products-technical-reference-li…3.2 Release notes https://...
Hello,Apart from hardware compatibility, you need to evaluate OS and SAN devices ( switches, arrays ) compatibilityI would suggest you to verify your environment against latest patch release of UCSM 2.2.8 series You can perform the infra upgrade ( i....
