Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
This switch is really not recommended for iSCSI and isn’t included in the tested switches for use with EqualLogic Arrays. See the Hardware compatibility matrix (http://en.community.dell.com/dell-groups/dtcmedia/m/mediagallery/20438558)Typically, it ...
I believe that the following command will show you the interface port and what the ASIC/ASIC_PORT is assigned to it:show platform pm if-numbersIn the display, the column "port" displays the [ASIC]/[ASIC_PORT], ex. "1/3" would be ASIC 1 Port 3 (on tha...
Hello,One thing to be aware of is that the 3560 switche are usually considered “wiring closet” and not “data center” switches. They typically are not used in iSCSI SAN situations (largely due to the buffers for each port are small compared to data c...
This leads me to believe that you have a misconfiguration somewhere, in either the physical layer, or host iSCSI timeouts, switch configuration or older Array Firmware.Just to clarify one point; It’s a bit more the just “tries to ping” the host, what...
