Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello there,
I've been struggling with an issue for a while now on a 2504 WLC running the latest 8.3.102.0 code that has two (2) 2702I APs connected. I got this setup through a Mobility Express promotion that I decided to deploy in my home after run...
I'm not sure what's going on, but today things seem to be working better (again, for no real apparent reason). I did ensure both the WLC and Meraki dashboard were marked friendly/whitelisted on the respective devices, but haven't done much beyond the...
Hi Philip,
Thanks for your reply. I have tried running the MR32 with the same SSID as the 2702s before to see if traffic would still work between them and did see issues when a Chromecast would associate to the MR32 and the device I was using was on ...
Yep, Thanks for the reply. I finally found the answer here: http://www.cisco.com/en/US/products/ps10493/products_tech_note09186a0080c0e461.shtmlProtip: remember to hit next under the controller properties to get to the screen where you can disable th...
Hi, I have one of these servers doing the same thing. Going to call it in, but what/where is the setting to make it stop, not seeing it in BIOS and wondering if it's somewhere else. Thanks!
