Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,Please help me to achive inbound load sharing on my 2 Internet Routers which are connected to 2 different ISP's Routers.I tried to achive this via as-path prepend but not sure what mistake I am doing that still inbound traffic is going via one...
Hi Guys, I am having 2 internet routers connected with two different ISPs.i am running GLBP between the 2 routers.Whenever any one of the internet links goes down the auto failover does not work.I have to manually shut the LAN interface of the router...
Hellp Everyone,I am trying to create a Access-List on my Core Switch, in which I want to allow few internet website & block the rest of them.I want to allow the whole Intranet but few intranet websites also needs access to the internet.Can we create ...
Mahesh,I have tried this as well. but still not working.Below is the config taken from router:============================HK25-HGCrouter-60M#sh access-listsStandard IP access list 50 10 permit 193.63.1.0, wildcard bits 0.0.0.255 HK25-HGCrouter-60...
Then I tried to sub devide 1.0/24 & 3.0/24 network one from each link. then also its not workingOne more thing I observed that after creating teh access-list or prefix-list I don't get any matches on 199.63.1.0/24 and 3.0/24Not sure why i am not gett...
Mahesh,I tried your script and run it on my both the routers and unfortunately my whole traffic was stopped and not working.I checked with my ISP PACnet and they informed me :that we only accept /24 and for /25 its no longer routable towards the inte...
Thanks Mahesh for the details info and script.1/ Does this IP (199.63.1.024 and 199.63.3.0/24) was assigned by ISP or did you taken from internet registry. If it belongs to one ISP then other ISP will not accept it, so there is no way you can load sh...
